Aluminum Electrolytic Capacitors Accessories PYR 5008 and 7511 Resistors Overview Applications KEMET s PYR resistors are wire wound on a ceramic core and KEMET s PYR resistors can be used for voltage balancing of coated with high temperature silicone. The mounting brackets are series connected electrolytic can-type capacitors and/or discharge made of stainless steel and connected by two point spotwelding. purposes. PYR resistors are for use in voltage balancing and/or discharge of electrolytic capacitors, are easy to mount and fit capacitor diameters 50 90 mm. Performance Characteristics Item Specification Standards CECC 40201, MILR26E Resistance Range 10 47 k Resistance Tolerance +/- 5% Rated Voltage 700 VDC acc. to CECC 40201003 Temperature Range -55 to +105C Dimensions PYR Millimeters A L d m B H S D Weight Type 1 2 1 1 Maximum Approximate (g) PYR 5008 22.0* 40 10.6 6.3 21 15 0.4 10 9 PYR 7511 32.0 50 10.6 6.3 21 15 0.4 10 11 * Brackets are adjustable up to A = 28.5 One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com A4043 ACCESSORIES 4/29/2013 1Aluminum Electrolytic Capacitors Accessories PYR 5008 and 7511 Resistors Discharge Resistor Part Number Table PYR P max () P max () P max () Fits Capacitor Part Number Code R (k)* 40C 85C 105C Diameter PYR 5008 / 47 47 10 8 7 50 65 PYR 7511 / 10 10 13 11 10 75 90 PYR 7511 / 18 18 13 11 10 75 90 PYR 7511 / 27 27 13 11 10 75 90 PYR 7511 / 47 47 13 11 10 75 90 * Other R values available upon request Mounting Kits Insulated Version M8 Stud (M12 Stud) Non-Insulated Version M8 Stud (M12 Stud) Dimensions in mm. All of the above accessories may be ordered individually using the part number shown or as kits using the kit part numbers shown in the Kit Contents and Ordering Information. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com A4043 ACCESSORIES 4/29/2013 2