R.41 Loose Taped Y2 / X1 CLASS (IEC 60384-14) MKP Series Fig.1 Fig.2 meTAllized Pol YPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTIES Typical applications: Interference suppression and across- the-line applications. Suitable for use in situations where failure of the capacitor could lead to danger of electric shock. PRoDUCT CoDE: R41 Not for use in series with the mains. See www.kemet.com for more information. note: R.41 series has replaced the R73 series (available only upon request). For new design we suggest the use of the R.41 series. Pitch Box thickness (B) Maximum dimensions (mm) p = 7.5 p = 10 p = 15 15<p27.5 p = 37.5 d 0.05 (mm) (mm) B max H max L max 0.5 0.6 0.6 or 0.8* 0.8 1 7.5 All B +0.1 H +0.1 L +0.2 * See size table. 10.0 All B +0.2 H +0.1 L +0.2 All dimensions are in mm. 15.0 <7.5 B +0.2 H +0.1 L +0.3 15.0 7.5 B +0.2 H +0.1 L +0.5 22.5 All B +0.2 H +0.1 L +0.3 27.5 All B +0.2 H +0.1 L +0.3 37.5 All B +0.3 H +0.1 L +0.3 Gene RAl TeCHniCAl dATA TeST meTHod And PeRFo RmAnCe damp heat, steady state: dielectric: polypropylene film. Plates: metal layer deposited by evaporation under vacuum. Test conditions Temperature: +402C Winding: non-inductive type. l eads: 0.6 tinned wire. Relative humidity (RH): 93 2% = 0.5 tinned wire, low thermical conductivity. Test duration: 56 days Protection: plastic case, thermosetting resin filled. Box Performance material is solvent resistant and flame retardant according to Dielectric strength: no dielectric breakdown or UL94 V0. flashover at 1500Vac/1 min marking: Manufacturers logo, series, capacitance, tolerance, Capacitance change C/C : 5% rated voltage, capacitor class, dielectric code, climatic Insulation resistance: 50% of initial limit. category, passive flammability category, manufacturing date endurance: code, approvals, manufacturing plant. Test conditions Climatic category: 40/110/56 IEC 60068-1 Temperature: 110C2C Test duration: 1000 h o perating temperature range: -40 to+110C Voltage applied: 1.7 x V + 1000Vac 0.1 s/h R Related documents: IEC 60384-14, EN 60384-14. Performance Dielectric strength: no dielectric breakdown or flashover at 1500Vac/1 min ele CTRiCAl CHARACTeRiSTiCS Capacitance change C/C : 10% Rated voltage (V ): 300Vac / 1000Vdc 50/60Hz R Insulation resistance: 50% of initial limit. Capacitance range: 1000pF to 1.0F Resistance to soldering heat: Capacitance values: E6 series (IEC 60063 Norm). Test conditions Capacitance tolerances (measured at 1 kHz): Solder bath temperature: +260C5C 10% (K) 20% (M). Dipping time (with heat screen):10 s1 s dissipation factor (dF): Performance -4 tg x 10 at +25C 5C: 30 (20)* at 1kHz Capacitance change C/C : 2% * Typical value insulation resistance: Test conditions Temperature: +25C5C Voltage charge time: 1 min Voltage charge: 100 Vdc Performance 5 5 ) 1 x 10 M (5 x 10 M * for C 0.33 F 30000 s (150000 s)* for C >0.33 F * Typical value Test voltage between terminations (on all pieces): 2500Vac for 1 s + 5000Vdc for 1 s at +25C5C 169 09/2008 R.41 Y2 / X1 CLASS (IEC 60384-14) MKP Series meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTIES Typical applications: Interference suppression and across- the-line applications. Suitable for use in situations where failure of the capacitor could lead to danger of electric shock. PRoDUCT CoDE: R41 Not for use in series with the mains. See www.kemet.com for more information. Table 1 Standard lead Taping style ordering Rated 300 Vac/1000Vdc d max Part number Std dimensions packaging style length code Cap. dv/dt at 420Vdc (Digit 10 to 11) P Fig. Pitch 2 B H L p (mm) (V/ s) (mm) (No.) (mm) 1000 pF1000 pF1000 pF 4.04.04.0 9.09.09.0 10.010.010.0 7.57.57.5 0.50.50.5 800800800 R413D R413D R413D 111100 - - 00 -100 - - 00 -100 - - 00 - AMMo-PACK 6.35 1 7.5 DQ AMMo-PACK 12.70 1 10.0/15.0 DQ 2200 pF2200 pF2200 pF2200 pF 4.04.04.04.0 9.09.09.09.0 10.010.010.010.0 7.57.57.57.5 0.50.50.50.5 800800800800 R413D R413D R413D R413D 1220 - - 00 -1220 - - 00 -1220 - - 00 -1220 - - 00 - AMMo-PACK 19.05 2 22.5 DQ 3300 pF3300 pF3300 pF 5.05.05.0 10.510.510.5 10.010.010.0 7.57.57.5 0.50.50.5 800800800 R413D R413D R413D 1330 - - 00 -1330 - - 00 -1330 - - 00 - REEL 355mm 6.35 1 7.5 CK in PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSSin PRoGReSS 4700 pF4700 pF4700 pF4700 pF 6.06.06.06.0 12.012.012.012.0 10.510.510.510.5 7.57.57.57.5 0.50.50.50.5 800800800800 R413D R413D R413D R413D 1470 - - 00 -1470 - - 00 -1470 - - 00 -1470 - - 00 - REEL 500mm 12.70 1 10.0/15.0 CK 1000 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1100 - - 00 - REEL 500mm 19.05 2 22.5/27.5 CK +2 1500 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1150 - - 00 - Loose, short leads 44 00 +1/-2 Loose, long leads 17 Z3 2200 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1220 - - 00 - (p<10mm) 3300 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1330 - - M1 - 1 Loose, long leads 25 JY (p=10mm) 4700 pF 5.0 11.0 13.0 10.0 0.6 800 R413F 1470 - - M1 - Loose, long leads +2/-1 25 50 6800 pF 6.0 12.0 13.0 10.0 0.6 800 R413F 1680 - - 00 -M (p15mm) +5 30 40 3300 pF 5.0 11.0 18.0 15.0 0.6 600 R413I 1330 - - 00 - Note: Ammo-pack is the preferred packaging for taped 4700 pF 5.0 11.0 18.0 15.0 0.6 600 R413I 1470 - - 00 - version 6800 pF 5.0 11.0 18.0 15.0 0.6 600 R413I 1680 - - 00 - APPRoVAlS 0.010 F 5.0 11.0 18.0 15.0 0.6 600 R413I 2100 - - 00 - 0.015 F 5.0 11.0 18.0 15.0 0.6 600 R413I 2150 - - M1 - ENEC Class Y2 / X1 File No. V4160 IEC 60384-14 0.022 F 6.0 12.0 18.0 15.0 0.6 600 R413I 2220 - - M1 - (*) 0.033 F 7.5 13.5 18.0 15.0 0.6 600 R413I 2330 - - M1 - UL 1414 0.047 F 8.5 14.5 18.0 15.0 0.6 600 R413I 2470 - - M1 - Across-the-line FileNo.E97797 (250Vac- 85C) 0.068 F 11.0 19.0 18.0 15.0 0.8 600 R413I 2680 - - 00 - 0.047 F 6.0 15.0 26.5 22.5 0.8 500 R413N 2470 - - 00 - Across-the-line CSA - C22.2 No.1 certifi ed for File No. E 97797 (250Vac- 85C) 0.068 F 6.0 15.0 26.5 22.5 0.8 500 R413N 2680 - - M1M - Canada 0.068 F 7.0 16.0 26.5 22.5 0.8 500 R413N 2680 - - 00 - Electromagnetic 0.10 F 8.5 17.0 26.5 22.5 0.8 500 R413N 3100 - - M1 - UL 1283 Interference File No. E85238 (300 Vac-110C) 0.15 F 10.0 18.5 26.5 22.5 0.8 500 R413N 3150 - - M1 - Filters 0.22 F 13.0 22.0 26.5 22.5 0.8 500 R413N 3220 - - 00 Electromagnetic 0.22 F 13.0 22.0 32.0 27.5 0.8 400 R413R 3220 - - 00 - CSA - C22.2 No.8 Interference File No.E85238 (300 Vac-110C) Filters certifi ed 0.33 F 14.0 28.0 32.0 27.5 0.8 400 R413R 3330 - - 00 - for Canada 0.47 F 18.0 33.0 32.0 27.5 0.8 400 R413R 3470 - - 00 - File CQC03001006820 0.68 F 18.0 33.0 32.0 27.5 0.8 400 R413R 3680 - - 00 - GB IT 14472 Class Y2 / X1 CQC03001006821 0.47 F 13.0 24.0 41.5 37.5 1.0 300 R413W 3470 - - 00 - (in progress for pitch 7.5 mm) 0.68 F 16.0 28.5 41.5 37.5 1.0 300 R413W 3680 - - 00 - Approved according to IEC 60384-14 1.0 F 20.0 40.0 41.5 37.5 1.0 300 R413W 4100 - - 00 - According to IEC 60065. Mechanical version and packaging (Table1) (*) ENEC mark has replaced all the following European Tolerance: K (10%) M (20%) National marks: E12 Series available upon request All dimensions are in mm. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute and we specifically disclaim any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. 09/2008 170