R73 KP series FIl M-FOIl POly PROPylene CAPACITOR HIgH CURRen T APPl ICATIOnS Loose Typical applications: deflection circuits in TV-sets (fly-back tuning), switching spikes suppression in sMPs, sNUBBeR and sCR commutating circuits, switching circuit in electronic ballasts, applications with high voltage and very high current. PRoDUCT CoDe: R73 Fig. 1 Fig. 2 Taped Ple ASe USe SeRIeS R76 OR R77 InSTeAD Pitch Box thickness Maximum dimensions (mm) (mm) (mm) B max H max L max 15.0 <7.5 B +0.2 H +0.1 L +0.3 15.0 7.5 B +0.2 H +0.1 L +0.5 22.5 All B +0.2 H +0.1 L +0.3 27.5 All B +0.2 H +0.1 L +0.3 15 p 27.5 p = 37.5 d0.05 0.8 1.0 37.5 All B +0.3 H +0.1 L +0.3 All dimensions are in mm PRODUCT CODe SySTeM gene RAl TeCHnICAl DATA The part number, comprising 14 digits, is formed as follows: Dielectric: polypropylene film. Plates: metal foil for 1 section. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 metal foil + metallized film for 2 sections. - R 7 3 Winding: non-inductive type. l eads: tinned wire. Digit 1 to 3 series code. Protection: plastic case, thermosetting resin filled. Digit 4 d.c. rated voltage: Box material is solvent resistant and flame for 1 section retardant according to UL94 V0. e = 100V G = 160V I = 250V Marking: capacitance, tolerance, D.C. rated voltage, M = 400V manufacturers logo, series (R73), dielectric for 2 sections code (KP), manufacturing date code. P = 630V Q = 1000V R = 1250V Climatic category: 55/105/56 IeC 60068-1 T = 1600V U = 2000V Operating temperature range: -55 to +105C Digit 5 Pitch: Related documents: IeC 60384-13 I = 15.mm N = 22.5mm R = 27.5mm W = 37.5mm. Digit 6 to 9 Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table 1) Digit 12 Identifies the dimensions and electrical characteristics. Digit 13 Internal use. Digit 14 Capacitance tolerance: H=2.5% (*) J=5% K=10% (*) only for 2 sections. Table 1 (for more detailed information, please refer to page 14.) Standard packaging l ead Taping style Ordering code style length P Fig. Pitch 2 (Digit 10 to 11) (mm) (mm) (No.) (mm) AMMo-PACK 12.70 1 15.0 DQ AMMo-PACK 19.05 2 22.5 DQ ReeL 355mm 12.70 1 15.0 GY ReeL 500mm 12.70 1 15.0 CK ReeL 500mm 19.05 2 22.5 / 27.5 CK +2 Loose, short leads 4 se +5 Loose, long leads 30 40 +2/-1 Loose, long leads 25 50 Note: Ammo-pack is the preferred packaging for taped version. 09/2008 79R73 KP series FIl M-FOIl POly PROPylene CAPACITOR HIgH CURRen T APPl ICATIOnS PRoDUCT CoDe: R73 Rated 100Vdc / 63Vac Max Max K Part number 0 Cap. s td dimensions dv/dt polypropylene 2 B H L p (V/s) (V /s) film dielectric 0.047 F 5.0 11.0 18.0 15.0 2400 0.48 e6 R73eI 2470--0-- 0.068 F 6.0 12.0 18.0 15.0 2400 0.48 e6 R73eI 2680--0-- metal foil 0.10 F 7.5 13.5 18.0 15.0 2400 0.48 e6 R73eI 3100--0-- 0.15 F 10.0 16.0 18.0 15.0 2400 0.48 e6 R73eI 3150--0-- 1 section Rated 160Vdc / 90Vac Max Max K Part number (100-160-250-400Vdc) 0 Cap. s td dimensions dv/dt 2 B H L p (V/s) (V /s) 0.033 F 5.0 11.0 18.0 15.0 3000 0.96 e6 R73GI 2330--0-- 0.047 F 6.0 12.0 18.0 15.0 3000 0.96 e6 R73GI 2470--0-- 0.068 F 7.5 13.5 18.0 15.0 3000 0.96 e6 R73GI 2680--0-- 0.10 F 10.0 16.0 18.0 15.0 3000 0.96 e6 R73GI 3100--0-- Rated 250Vdc / 125Vac* Max All dimensions are in mm. Max K Part number 0 Cap. s td dimensions dv/dt 2 B H L p (V/s) (V /s) Note: If the working voltage (V) is lower than the rated 0.015 F 5.0 11.0 18.0 15.0 4800 2.4 e6 R73II 2150--0-- voltage (V ), the capacitor may work at higher dv/dt. R 0.022 F 6.0 12.0 18.0 15.0 4800 2.4 e6 R73II 2220--0-- In this case the maximum value allowed is obtained 0.033 F 7.5 13.5 18.0 15.0 4800 2.4 e6 R73II 2330--0-- multiplying the above value (see table dv/dt) with the ratio V /V. The pulse characteristic K depends 0.047 F 10.0 16.0 18.0 15.0 4800 2.4 e6 R73II 2470--0-- R 0 on the voltage wave-form and in any case it cannot Rated 400Vdc / 160Vac Max overcome the value given in the above table. Max K Part number 0 Cap. s td dimensions dv/dt The dv/dt test is carried out at 2 times the above 2 B H L p (V/s) (V /s) values. 0.010 F 5.0 11.0 18.0 15.0 6000 4.8 e6 R73MI 2100--0-- *Not suitable for across-the-line applications. Please refer to 0.015 F 6.0 12.0 18.0 15.0 6000 4.8 e6 R73MI 2150--0-- Interference suppression Capacitors (page 145). 0.022 F 7.5 13.5 18.0 15.0 6000 4.8 e6 R73MI 2220--0-- 0.033 F 8.5 14.5 18.0 15.0 6000 4.8 e6 R73MI 2330--0-- 0.047 F 10.0 16.0 18.0 15.0 6000 4.8 e6 R73MI 2470--0-- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%) K (10%) 09/2008 80