R75LI3100AA00K Kemet

R75 2 - R75 L MKP series METALLIZED POLyPROPyLENE FILM CAPACITOR Typical applications: This special release is specifically designed for application in series with the main (Capacitive power supply), with particular protection against severe ambient conditions. BEST FITTING COMPONENTS IN TERMS OF BOTH SIZE & PERFORMANCES PRODUCT CODE: R752 (Digit 12: 0 to 9) R75L Digit 12: 0 to 9) Pitch Box thickness Maximum dimensions (mm) (mm) (mm) B max H max L max 15.0 <7.5 B +0.2 H +0.1 L +0.3 15.0 7.5 B +0.2 H +0.1 L +0.5 15p27.5 p = 37.5 d0.05 22.5 All B +0.2 H +0.1 L +0.3 0.8 1.0 27.5 All B +0.2 H +0.1 L +0.3 All dimensions are in mm. 37.5 All B +0.3 H +0.1 L +0.3 PRODUCT CODE SySTEM GENERAL TECHNICAL DATA The part number, comprising 14 digits, is formed as follows: Dielectric: polypropylene film. Plates: aluminium layer deposited by evaporation under 1 2 3 4 5 6 7 8 9 10 11 12 13 14 vacuum. R 7 5 - Winding: non-inductive type. Leads: tinned wire. Digit 1 to 3 Series code. Protection: plastic case, thermosetting resin filled. Digit 4 a.c. rated voltage: Box material is solvent resistant and flame 2 = 230V L = 250V retardant according to UL94 V0. Digit 5 Pitch: Marking: manufacturers logo, series (R75), dielectric I=15mm N= 22.5 .mm code (MKP), capacitance, tolerance, A.C. rated R=27.5mm W =37.5mm voltage, manufacturing date code. Digit 6 to 9 Digits 7 - 8 - 9 indicate the first three digits of Climatic category: 55/105/56 IEC 60068-1 Capacitance value and the 6th digit indicates Operating temperature range: -55 to +105C the number of zeros that must be added to Related documents: IEC 60384-16 obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table 1) Winding scheme Digit 12 Identifies the dimensions and electrical characteristics (0 to 9). Digit 13 Internal use. Digit 14 Capacitance tolerance: K=10% M=20% Tolerance 5% (J) available upon request single sided metallized Table 1 polypropylene film Lead Taping style Ordering Standard length code packaging style (Digit 10 P Fig. Pitch 2 (mm) (mm) (No.) (mm) to 11) AMMo -PACK 12.70 2 15.0 DQ AMMo -PACK 19.05 3 22.5 DQ Ree L 355mm 12.70 2 15.0 GY Ree L 500mm 12.70 2 15.0 CK ReeL 500mm 19.05 3 22.5/27.5 CK +2 Loose, short leads 04 AA +5 Loose, long leads 30 40 +2/-1 (p15mm) 25 50 Note: Ammo-pack is the preferred packaging for taped version. 09/2008 182R75 2 - R75 L MKP series METALLIZED POLyPROPyLENE FILM CAPACITOR PRODUCT CODE: R752 (Digit 12: 0 to 9) R75L (Digit 12: 0 to 9) Max Max Rated 230vac / 400vdc* Rated 250vac / 560vdc* Max K Part Number Max K Part Number 0 0 Cap. Std dimensions Cap. Std dimensions dv/dt dv/dt 2 2 B H L p (V/s) (V /s) B H L p (V/s) (V /s) 0.033 F 4.0 9.0 13.0 10.0 1000 800 E3 R752F 2330--0-- 0.010 F 4.0 9.0 13.0 10.0 1500 168 E4 R75LF 2100--0-- 0.100 F 6.0 12.0 13.0 10.0 1000 800 E3 R752F 3100--0-- 0.015 F 4.0 9.0 13.0 10.0 1500 168 E4 R75LF 2150--0-- 0.082 F 5.0 11.0 18.0 15.0 700 560 E3 R752I 2820--0-- 0.022 F 4.0 9.0 13.0 10.0 1500 168 E4 R75LF 2220--0-- 0.10 F 5.0 11.0 18.0 15.0 700 560 E3 R752I 3100--0-- 0.033 F 5.0 11.0 13.0 10.0 1500 168 E4 R75LF 2330--0-- 0.15 F 6.0 12.0 18.0 15.0 700 560 E3 R752I 3150--0-- 0.047 F 5.0 11.0 13.0 10.0 1500 168 E4 R75LF 2470--0-- 0.18 F 6.0 12.0 18.0 15.0 700 560 E3 R752I 3180--0-- 0.068 F 6.0 12.0 13.0 10.0 1500 168 E4 R75LF 2680--0-- 0.22 F 7.5 13.5 18.0 15.0 700 560 E3 R752I 3220--0-- 0.056 F 5.0 11.0 18.0 15.0 900 101 E4 R75LI 2560--0-- 0.27 F 8.5 14.5 18.0 15.0 700 560 E3 R752I 3270--0-- 0.068 F 5.0 11.0 18.0 15.0 900 101 E4 R75LI 2680--0-- 0.33 F 8.5 14.5 18.0 15.0 700 560 E3 R752I 3330--0-- 0.082 F 5.0 11.0 18.0 15.0 900 101 E4 R75LI 2820--0-- 0.47 F 10.0 16.0 18.0 15.0 700 560 E3 R752I 3470--0-- 0.10 F 6.0 12.0 18.0 15.0 900 101 E4 R75LI 3100--0-- 0.27 F 6.0 15.0 26.5 22.5 250 200 E3 R752N 3270--0-- 0.15 F 7.5 13.5 18.0 15.0 900 101 E4 R75LI 3150--0-- 0.33 F 6.0 15.0 26.5 22.5 250 200 E3 R752N 3330--0-- 0.18 F 7.5 13.5 18.0 15.0 900 101 E4 R75LI 3180--0-- 0.47 F 7.0 16.0 26.5 22.5 250 200 E3 R752N 3470--0-- 0.22 F 8.5 14.5 18.0 15.0 900 101 E4 R75LI 3220--0-- 0.56 F 8.5 17.0 26.5 22.5 250 200 E3 R752N 3560--0-- 0.27 F 10.0 16.0 18.0 15.0 900 101 E4 R75LI 3270--0-- 0.68 F 10.0 18.5 26.5 22.5 250 200 E3 R752N 3680--0-- 0.33 F 10.0 16.0 18.0 15.0 900 101 E4 R75LI 3330--0-- 0.82 F 10.0 18.5 26.5 22.5 250 200 E3 R752N 3820--0-- 0.22 F 6.0 15.0 26.5 22.5 300 336 E3 R75LN 3220--0-- 1.0 F 11.0 20.0 26.5 22.5 250 200 E3 R752N 4100--0-- 0.27 F 6.0 15.0 26.5 22.5 300 336 E3 R75LN 3270--0-- 1.5 F 13.0 22.0 26.5 22.5 250 200 E3 R752N 4150--0-- 0.33 F 7.0 16.0 26.5 22.5 300 336 E3 R75LN 3330--0-- 0.47 F 9.0 17.0 32.0 27.5 130 104 E3 R752R 3470--0-- 0.47 F 8.5 17.0 26.5 22.5 300 336 E3 R75LN 3470--0-- 0.56 F 9.0 17.0 32.0 27.5 130 104 E3 R752R 3560--0-- 0.56 F 10.0 18.5 26.5 22.5 300 336 E3 R75LN 3560--0-- 0.68 F 9.0 17.0 32.0 27.5 130 104 E3 R752R 3680--0-- 0.68 F 11.0 20.0 26.5 22.5 300 336 E3 R75LN 3680--0-- 0.82 F 9.0 17.0 32.0 27.5 130 104 E3 R752R 3820--0-- 0.82 F 11.0 20.0 26.5 22.5 300 336 E3 R75LN 3820--0-- 1.0 F 11.0 20.0 32.0 27.5 130 104 E3 R752R 4100--0-- 1.0 F 13.0 22.0 26.5 22.5 300 336 E3 R75LN 4100--0-- 1.2 F 11.0 20.0 32.0 27.5 130 104 E3 R752R 4120--0-- 0.33 F 9.0 17.0 32.0 27.5 150 168 E3 R75LR 3330--0-- 1.5 F 13.0 22.0 32.0 27.5 130 104 E3 R752R 4150--0-- 0.39 F 9.0 17.0 32.0 27.5 150 168 E3 R75LR 3390--0-- 1.8 F 13.0 22.0 32.0 27.5 130 104 E3 R752R 4180--0-- 0.47 F 9.0 17.0 32.0 27.5 150 168 E3 R75LR 3470--0-- 2.2 F 14.0 28.0 32.0 27.5 130 104 E3 R752R 4220--0-- 0.56 F 9.0 17.0 32.0 27.5 150 168 E3 R75LR 3560--0-- 2.7 F 18.0 33.0 32.0 27.5 130 104 E3 R752R 4270--0-- 0.68 F 11.0 20.0 32.0 27.5 150 168 E3 R75LR 3680--0-- 3.3 F 18.0 33.0 32.0 27.5 130 104 E3 R752R 4330--0-- 0.82 F 11.0 20.0 32.0 27.5 150 168 E3 R75LR 3820--0-- 3.9 F 18.0 33.0 32.0 27.5 130 104 E3 R752R 4390--0-- 1.0 F 13.0 22.0 32.0 27.5 150 168 E3 R75LR 4100--0-- 4.7 F 22.0 37.0 32.0 27.5 130 104 E3 R752R 4470--0-- 1.2 F 13.0 22.0 32.0 27.5 150 168 E3 R75LR 4120--0-- 1.8 F 11.0 22.0 41.5 37.5 70 56 E3 R752W 4180--0-- 1.5 F 13.0 25.0 32.0 27.5 150 168 E3 R75LR 4150--0-- 2.2 F 13.0 24.0 41.5 37.5 70 56 E3 R752W 4220--0-- 1.8 F 18.0 33.0 32.0 27.5 150 168 E3 R75LR 4180--0-- 2.7 F 13.0 24.0 41.5 37.5 70 56 E3 R752W 4270--0-- 2.2 F 18.0 33.0 32.0 27.5 150 168 E3 R75LR 4220--0-- 3.3 F 16.0 28.5 41.5 37.5 70 56 E3 R752W 4330--0-- 2.7 F 18.0 33.0 32.0 27.5 150 168 E3 R75LR 4270--0-- 3.9 F 16.0 28.5 41.5 37.5 70 56 E3 R752W4390--0-- 3.3 F 22.0 37.0 32.0 27.5 150 168 E3 R75LR 4330--0-- 4.7 F 19.0 32.0 41.5 37.5 70 56 E3 R752W4470--0-- 3.9 F 22.0 37.0 32.0 27.5 150 168 E3 R75LR 4390--0-- 5.6 F 19.0 32.0 41.5 37.5 70 56 E3 R752W4560--0-- 1.2 F 11.0 22.0 41.5 37.5 90 101 E3 R75LW 4120--0-- 6.8 F 20.0 40.0 41.5 37.5 70 56 E3 R752W4680--0-- 1.5 F 13.0 24.0 41.5 37.5 90 101 E3 R75LW 4150--0-- 1.8 F 13.0 24.0 41.5 37.5 90 101 E3 R75LW 4180--0-- Mechanical version and packaging (Table1) Internal use 2.2 F 16.0 28.5 41.5 37.5 90 101 E3 R75LW 4220--0-- Tolerance: K (10%) M (20%) 2.7 F 16.0 28.5 41.5 37.5 90 101 E3 R75LW 4270--0-- 3.3 F 19.0 32.0 41.5 37.5 90 101 E3 R75LW 4330--0-- 3.9 F 19.0 32.0 41.5 37.5 90 101 E3 R75LW 4390--0-- All dimensions are in mm 4.7 F 20.0 40.0 41.5 37.5 90 101 E3 R75LW 4470--0-- 5.6 F 20.0 40.0 41.5 37.5 90 101 E3 R75LW 4560--0-- 6.8 F 24.0 44.0 41.5 37.5 90 101 E3 R75LW 4680--0-- 8.2 F 24.0 44.0 41.5 37.5 90 101 E3 R75LW 4820--0-- 10.0 F 30.0 45.0 41.5 37.5 90 101 E3 R75LW 5100--0-- Mechanical version and packaging (Table1) Internal use Tolerance: K (10%) M (20%) E12 Series available upon request Note: If the working voltage (V) is lower than the rated voltage (V ), the capacitor may work at higher dv/dt. In this case the R maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V /V. R The pulse characteristic K depends on the voltage wave-form and in any case it cannot overcome the value given in 0 the above table. The dv/dt test is carried out at 2 times the above values. *Not suitable for EMI filtering applications. 183 09/2008