TANTALUM MOLDED / AXIAL MIL-PRF-49137/1&5 T322 & T323 (CX01 & CX05) SERIES The KEMET T322 AND T323 (CX01 & CX05) Series offers a com- 2, 4, 6, 10, 15, 20, 25, 35, and 50 volts. Operating temperature range 2 plete line of extended range molded solid tantalum capacitors -55C to +85C at full rated voltage and with 3 85C rated voltage designed specifically for high speed automatic insertion applications. at 125C. These capacitors offer an extremely high capacitance-to-volume The gold color epoxy utilized permits laser marking with outstanding ratio while still maintaining excellent performance characteristics. permanency and legibility. Supplied in six axial lead tubular case sizes, these capacitors are T323 Series capacitors are qualified under MIL-PRF-49137/1 & 5 as ideally suited for use in printed wiring boards and all applications Military Style CX01 & CX05. requiring a high degree of packaging density and can be supplied in Typical applications include decoupling, blocking, bypassing and fil- bulk packaging or lead-taped on reels. tering in commercial computers, data processing, communications, The T322/T323 Series dimensions and tight lead wire-to-body con- and other electronic equipment. The low ESR/impedance at high fre- centricity permit installation by the same automatic insertion equip- quencies offered by this capacitor is especially suitable for decou- ment used for diodes and resistors. Available in working voltages of pling required by high speed computers. PERFORMANCE CHARACTERISTICS CAPACITANCE/VOLTAGE RANGE: T322 ESR (OHMS) at 100 kHz +25C 0.1-330F, 2-50 Volts. (The ESR values provided below are for reference only. No warranty, as stated on page 3 and reincorporated here, is made as to the accuracy of CAPACITANCE TOLERANCE: Available in standard these values for any particular T322 Series product.) EIA nominal values with 20%, 10% and 5% toler- ance. Cap. 6 10 15 20 25 35 50 F Volt Volt Volt Volt Volt Volt Volt 0.10 26.0 26.0 DISSIPATION FACTOR: Maximum DF limits are shown 0.12 26.0 26.0 in corresponding series part number listings on pages 0.15 21.0 21.0 0.18 21.0 21.0 44-48. See Application Notes Section, page 76 for addi- 0.22 17.0 17.0 tional description. 0.27 17.0 17.0 0.33 15.0 15.0 0.39 15.0 15.0 0.47 16.0 13.0 13.0 DC LEAKAGE CURRENT: Each corresponding part 0.56 14.0 13.0 13.0 number table lists maximum leakage current for each 0.68 12.0 10.0 10.0 0.82 12.0 10.0 10.0 capacitor on pages 44 through 48. See Application 1.00 10.0 10.0 8.0 8.0 Notes Section, page 76 for additional description. 1.20 10.0 10.0 8.0 8.0 1.50 10.0 9.0 8.0 6.0 5.0 1.80 10.0 9.0 8.0 6.0 5.0 RATED VOLTAGE WORKING VOLTAGE SURGE 2.20 13.0 8.0 7.0 6.0 5.0 3.5 2.70 13.0 8.0 7.0 6.0 5.0 3.5 VOLTAGE REVERSE VOLTAGE: See Application 3.30 13.0 10.0 6.0 5.5 5.0 4.0 3.0 Notes Section, page 76 & 77 for description. 3.90 13.0 10.0 6.0 5.5 5.0 4.0 3.0 4.70 10.0 8.0 5.0 4.5 4.0 3.0 2.5 5.60 10.0 8.0 5.0 4.5 4.0 3.0 2.5 6.80 8.0 6.0 4.0 3.6 3.1 2.5 2.0 AC RIPPLE VOLTAGE: Permissible AC ripple voltage is 8.20 8.0 6.0 4.0 3.6 3.1 2.5 2.0 related to equivalent series resistance (ESR) and power 10.0 6.0 5.0 3.2 2.9 2.5 2.0 1.6 12.0 6.0 5.0 3.2 2.9 2.5 2.0 1.6 dissipation capability. Maximum power dissipation for 15.0 5.0 3.7 2.5 2.3 2.0 1.6 1.2 each case size is listed in Table below. For additional 18.0 5.0 3.7 2.5 2.3 2.0 1.6 1.2 22.0 3.7 2.7 2.0 1.8 1.5 1.3 1.0 description see page 79. 27.0 3.7 2.7 2.0 1.8 1.5 1.3 1.0 33.0 3.0 2.1 1.6 1.4 1.2 1.0 39.0 3.0 2.1 1.6 1.4 1.2 1.0 47.0 2.0 1.7 1.3 1.2 1.0 0.8 Case Power Dissipation 56.0 2.0 1.7 1.3 1.2 1.0 Size (max.) 25C (watts) 68.0 1.8 1.3 1.0 0.9 0.8 A .060 82.0 1.8 1.3 1.0 0.9 100.0 1.6 1.0 0.8 0.6 B .070 120.0 1.6 1.0 0.8 C .080 150.0 0.9 0.8 0.6 180.0 0.9 0.8 D .090 220.0 0.9 0.6 E .100 270.0 0.9 F.110 330.0 0.7 Maximum Power Dissipation Capability 25C For additional Environmental Test Information see pages 80, 81 and 82. IMPEDANCE and ESR: See Application Notes Section, pages 77 & 78 for description. Reference ESR values LEAD MATERIAL: Solder coated steel core with copper are shown in adjoining column, this page. ply per MIL-STD-1276. ENVIRONMENTAL CONSIDERATIONS: LEAD TAPE and REEL: Reeling per specification A. Shock Test: MIL-STD-202, Method 213. RS-296. See pages 71 and 73 for additional infor- B. Thermal Shock, MIL-STD-202, Method 107. mation. C. Moisture Resistance: MIL-STD-202, Method 106. D. Solderability: MIL-STD-202, Method 208. 42 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300TANTALUM MOLDED / AXIAL MIL-PRF-49137/1 & 5 T322 & T323 (CX01 & CX05) SERIES Effective September 30, 2005, the KEMET T322 Series is RoHS compliant. CAPACITOR OUTLINE DRAWINGS 1.50.250 L 1.50.250 D (38.106.35) (38.106.35) + W B DIMENSIONS INCHES & (MILLIMETERS) CASE SIZE D (MAX) L (MAX) W A .095 (2.41) .260 (6.6) .020 (.51) B .110 (2.79) .290 (7.37) .020 (.51) C .180 (4.57) .345 (8.76) .020 (.51) D .180 (4.57) .420 (10.67) .020 (.51) E .280 (7.11) .530 (13.46) .025 (.64) F .300 (7.62) .710 (18.03) .025 (.64) T322 & T323 ORDERING INFORMATION T 32X A 474 M 035 A S C* TANTALUM SPECIFICATION (when necessary Reeling Per EIA SERIES Sub-Miniature, Molded, Polar, Solid Tantalum, Specification RS-296 Insert appropriate number to replace LEAD MATERIAL letter X 322 or 323 (CX01, CX05). S Standard T 100% Tin CASE SIZE FAILURE RATE LEVEL A, B, C, D, E, or F A Not Applicable CAPACITANCE IN PICOFARADS VOLTAGE RATING First two digits are significant figures. Third digit is number of zeros following. CAPACITANCE TOLERANCE *M 20% *K 10% *J 5% *Part Number Example: T322A474M035AS (14 digits no spaces) * M & K only tolerances available for T323 Series. MIL-PRF-49137/5 MILITARY ORDERING INFORMATION CX 05 D 225 K TYPE CAPACITANCE TOLERANCE Capacitor, Fixed, Solid Tantalum, Symbol Capacitance Tolerance Molded, Non-hermetically Sealed Percent () K10 STYLE 01, 05 (T323) A, B, C, and D M20 VOLTAGE CAPACITANCE TOLERANCE Rated (85C) Surge (85C) The nominal capacitance value, expressed in Symbol Volts, DC Volts, DC picofarads (pF), is identified by a three-digit D 6 8.0 number the first two digits represent sig- F 10 13.0 H 15 20.0 nificant figures and the last digit specifies the J 20 26.0 number of zeros to follow. K 25 32.0 M 35 46.0 N 50 65.0 CAPACITOR MARKING 105M Capacitance Value (pF), Capacitance Tolerance +25 K Polarity, Voltage, KEMET 0324 Date Code (Year, Week) KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 43 T322/T323 Tantalum Molded / Axial