Tantalum Through-Hole Capacitors Radial Dipped T368 UltraDip II Overview The KEMET T368 is manufactured according to the on a lot-by-lot basis for Group A and Group B inspection to requiarements of MIL-PRF-49137, while maintaining all the ensure compliance. Product supplied per MIL-PRF-49137 performance characteristics of the UltraDip II. Performance also receives an additional post-process burn-in for at characteristics meet or exceed the requirements of MIL- least two hours under accelerated voltage stress in excess PRF-49137. In addition to the standard UltraDip II process of 125% of DC rated voltage. This post-process burn-in is testing, all products supplied to MIL-PRF-49137 are sampled equivalent to 200 hours under rated conditions. Benefits Applications Taped and reeled per EIA Specification RS-468 Typical applications include filtering, bypassing, coupling, Laser-marked case blocking and RC timing circuits or other applications that Qualified to MIL-PRF-49137 can benefit from compactness. Capacitance values of 5.6 to 330 F Tolerances of 10% and 20% Voltage rating of 6 50 VDC Case sizes: C, D Ordering Information T 368 C 106 M 035 A S Capacitor Case Capacitance Code Capacitance Rated Voltage Series Failure Rate Termination Finish Packaging Class Size (pF) Tolerance (VDC) T = T368 C, D First two digits M = 20% 006 = 6 Not Applicable S = Standard Blank = Bulk Tantalum represent K = 10% 010 = 10 T = 100% Sn (tin) 7301 = Tape & Reel significant 015 = 15 7303 = Tape & Reel figures. Third digit 020 = 20 7305 = Ammo specifies number 025 = 25 7317 = Ammo of zeros to follow. 035 = 35 050 = 50 Built Into Tomorrow KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2045 T368 10/20/2020 1Tantalum Through-Hole Capacitors Radial Dipped T368 UltraDip II Performance Characteristics Item Performance Characteristics Operating Temperature 55C to 125C Rated Capacitance Range 5.6 330 F at 120 Hz/25C Capacitance Tolerance M tolerance 20%, K tolerance 10% Rated Voltage Range 6 50 V DF (120 Hz at 25C) Refer to Part Number Electrical Specification Table Leakage Current Refer to Part Number Electrical Specification Table at rated voltage up to 85C Dimensions Millimeters (Inches) T368 C & D CASES W T Maximum Maximum 0.100 H Maximum (2.54) Maximum 0.025 0.002 0.187 0.032 (0.64 0.05) (4.75 0.81) 0.250 0.015 (6.35 0.38) Case T W H Size Maximum Maximum Maximum C 0.250 (6.35) 0.400 (10.16) 0.420 (10.67) D 0.250 (6.35) 0.460 (11.68) 0.520 (13.20) KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2045 T368 10/20/2020 2