Tantalum Through-Hole Capacitors Radial Dipped T396 & T398 UltraDip III (3 Leaded) Overview The KEMET UltraDip III capacitors offer the advantages that maintains the precise lead wire spacing within 0.015 of solid tantalum construction and afail-saf insertion inch. The gold color epoxy permits laser markings with mechanism. The three-leaded design (the anode is in the outstanding permanency and legibility. All case sizes are center) enables operators to insert the capacitors into printed with capacitance, voltage and vendor identification. printed circuit boards correctly without having to visually The UltraDip III exhibits low DC leakage, ESR and impedance determine polarity. This time-saving device also eliminates and mainttian excellent temperature stability. These board damage that may result from incorrect insertion. capacitors may be ordered with precut leads (see drawing for lengths) or in KEMET capacitor ARIS packaging (leads The UltraDip III features a capacitance range of 0.1 to 680 taped and on reels) for high speed automatic insertion F at 3 to 50 VDC. These miniature, dipped solid tantalum equipment. capacitors are encased in a tough plastic barrier coating Benefits Applications Taped and reeled per EIA Specification RS-468 Typical applications include filtering, bypassing, coupling, Laser-marked case blocking, and RC timing circuits or other applications that Capacitance values of 0.1 680 F can benefit from compactness. Tolerances of 20% and 10% (special order only) Voltage rating of 3 50 VDC Case sizes: A, B, C, D, E, F, G, H, J, K, L, M Ordering Information T 39X A 105 M 035 A S Capacitor Case Capacitance Code Capacitance Rated Voltage Failure Series Termination Finish Packaging Class Size (pF) Tolerance (VDC) Rate T = T396 A, B, First two digits M = 20% 003 = 3 Not S = Standard Blank = Bulk Tantalum Straight C, D, represent K = 10% 006 = 6 Applicable T = 100% Sn (tin) 7301 = Tape & Leads E, F, significant (Special order only) 010 = 10 Reel T398 G, H, figures. Third digit 016 = 16 7305 = Ammo Lead J, K, specifies number 020 = 20 Standoff L, M of zeros to follow. 025 = 25 035 = 35 050 = 50 Built Into Tomorrow KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2046 T396 T398 10/20/2020 1Tantalum Through-Hole Capacitors Radial Dipped T396 & T398 UltraDip III (3 Leaded) Performance Characteristics Item Performance Characteristics Operating Temperature 55C to 125C Rated Capacitance Range 0.1 680 F at 120 Hz/25C Capacitance Tolerance M tolerance 20% (standard), K tolerance 10% (special order only) Rated Voltage Range 3 50 V DF (120 Hz at 25C) Refer to Part Number Electrical Specification Table Leakage Current Refer to Part Number Electrical Specification Table at rated voltage up to 85C Dimensions Millimeters (Inches) T396 T398 W T W T Maximum Maximum Maximum Maximum H H Maximum Maximum 0.187 0.05 - + - 0.02 0.002 0.187 0.032 0.02 0.002 (4.75 1.27) (4.75 0.81) (0.50 0.05) (0.50 0.05) 0.10 0.008 0.10 0.008 0.20 0.015 (2.54 0.20) 0.20 0.015 (2.54 0.20) (5.08 0.38) (5.08 0.38) Both T396 T398 Case Size W T H H Width Thickness Height Height A 0.280 (7.1) 0.190 (4.8) 0.310 (7.9) 0.355 (9.0) B 0.280 (7.1) 0.190 (4.8) 0.320 (8.1) 0.365 (9.3) C 0.280 (7.1) 0.200 (5.1) 0.360 (9.1) 0.390 (9.9) D 0.280 (7.1) 0.200 (5.1) 0.370 (9.4) 0.390 (9.9) E 0.280 (7.1) 0.230 (5.8) 0.380 (9.7) 0.415 (10.5) F 0.280 (7.1) 0.240 (6.1) 0.410 (10.4) 0.430 (10.9) G 0.280 (7.1) 0.250 (6.3) 0.420 (10.7) 0.440 (11.2) H 0.280 (7.1) 0.270 (6.9) 0.420 (10.7) 0.440 (11.2) J 0.300 (7.6) 0.300 (7.6) 0.460 (11.7) 0.480 (12.2) K 0.340 (8.6) 0.340 (8.6) 0.500 (12.7) 0.500 (12.7) L 0.340 (8.6) 0.340 (8.6) 0.560 (14.2) 0.560 (14.2) M 0.360 (9.1) 0.360 (9.1) 0.620 (15.7) 0.620 (15.7) KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2046 T396 T398 10/20/2020 2