Tantalum Surface Mount Capacitors Automotive Grade T489 Automotive Grade Low DC Leakage MnO 2 Overview The KEMET T489 provides DC leakage current that is 25% compatibility with today s surface mount solder systems. Tin/ lower than the commercial T491. The T489 also offers lead (Sn/Pb) terminations are available upon request for any improved reliability, low ESR options, and meets or exceeds part number. Gold-plated terminations are also available for the requirements of EIA standard 535BAAC. This series use with conductive epoxy attachment processes. Standard is classified as moisture sensitivity level (MSL) 1 under packaging of these devices is Tape & Reel in accordance with J STD 020, with unlimited floor life time at 30C/85% EIA 481. This system provides perfect compatibility with all RH.The T489 standard terminations are available in 100% tape-fed placement units. matte tin and provide excellent wetting characteristics and Benefits Complies with AECQ200 DC Leakage at 0.0075CV Improved reliability: 0.50%/1,000 hours, 85C, rated voltage Low ESR options available Meets or exceeds EIA standard 535BAAC Tape & Reel standard packaging per EIA 481 Symmetrical, compliant terminations Laser-marked case Applications Typical applications include decoupling and filtering in automotive high-end applications. Environmental Compliance RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder or gold-plated. Halogen-free Epoxy compliant with UL94 V0 Molded Epoxy complies for outgassing testing under ASTM E 595. Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard T2057 T489 AUTO 6/8/2021 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comTantalum Surface Mount Capacitors Automotive Grade T489 Automotive Grade Low DC Leakage MnO 2 K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information T 489 B 156 M 016 A T A800 Rated Failure Capacitor Case Capacitance Capacitance Packaging Series Voltage Rate/ Termination Finish C-Spec Class Size Code (pF) Tolerance (C-Spec) (VDC) Design T = Low DC A First two K = 10% 006 = 6.3 A = N/A T = 100% Matte tin (Sn)-plated A = Automotive grade Blank = 7 Tantalum leakage B digits M = 20% 010 = 10 H = Standard solder coated 800 = ESR value reel series C represent 016 = 16 (SnPb 5% Pb minimum) (800 = 800 m) 7280 = 13 D significant 020 = 20 G = Gold-plated reel X figures. 025 = 25 Third digit 035 = 35 specifies 050 = 50 number of zeros. Performance Characteristics Item Performance Characteristics Operating Temperature 55C to 125C Rated Capacitance Range 0.10 470 F at 120 Hz/25C Capacitance Tolerance K Tolerance (10%), M Tolerance (20%) Rated Voltage Range 6.3 50 V DF (120 Hz) Refer to Part Number Electrical Specification ESR (100 kHz) Refer to Part Number Electrical Specification Leakage Current 0.0075 CV (A) at rated voltage after 5 minutes Reliability 0.50%/1,000 hours at 85C, V with 0.1 series resistance R KEMET Electronics Corporation KEMET Tower One East Broward Boulevard T2057 T489 AUTO 6/8/2021 22 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com