Tantalum Surface Mount Capacitors Standard Tantalum T489 Low DC Leakage MnO 2 Overview The KEMET T489 provides DC leakage current that is 25% with today s surface mount solder systems. Tin/lead (Sn/Pb) lower than the commercial T491. The T489 also offers terminations are available upon request for any part number. improved reliability, low ESR options, and meets or exceeds Gold-plated terminations are also available for use with the requirements of EIA standard 535BAAC. The T489 is conductive epoxy attachment processes. Standard packaging classified as moisture sensitivity level (MSL) 1 under J STD of these devices is Tape & Reel in accordance with EIA 481. 020: unlimited floor life time at 30C/85% RH. The T489 This system provides perfect compatibility with all tape-fed standard terminations are available in 100% matte tin and placement units. provide excellent wetting characteristics and compatibility Benefits DC Leakage at 0.0075 CV Improved reliability: 0.50%/1,000 hours, 85C, rated voltage Low ESR options available Meets or exceeds EIA standard 535BAAC Tape & Reel standard packaging per EIA 481 Symmetrical, compliant terminations Laser-marked case Applications Typical applications include decoupling and filtering, in many high-end applications. Environmental Compliance RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder or gold-plated. Halogen-free Epoxy compliant with UL94 V0 Molded Epoxy complies for outgassing testing under ASTM E 595. Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard T2024 T489 11/6/2020 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comTantalum Surface Mount Capacitors Standard Tantalum T489 Low DC Leakage MnO 2 K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information T 489 B 156 M 016 A T E800 Capacitor Case Capacitance Capacitance Rated Voltage Failure Rate/ Series Termination Finish ESR Class Size Code (pF) Tolerance (VDC) Design T = Low DC A First two digits K = 10% 006 = 6.3 A = T = 100% Matte tin (Sn)-plated E = ESR last Tantalum Leakage B represent significant M = 20% 010 = 10 N/A H = Standard solder coated three digits Series C figures. Third digit 016 = 16 (SnPb 5% Pb minimum) specify ESR in D specifies number of 020 = 20 G = Gold-plated mOhms X zeros. 025 = 25 (800 = 800 035 = 35 mOhms) 050 = 50 Performance Characteristics Item Performance Characteristics Operating Temperature 55C to 125C Rated Capacitance Range 0.10 470 F at 120 Hz/25C Capacitance Tolerance K Tolerance (10%), M Tolerance (20%) Rated Voltage Range 6.3 50 V DF (120 Hz) Refer to Part Number Electrical Specification ESR (100 kHz) Refer to Part Number Electrical Specification Leakage Current 0.0075 CV (A) at rated voltage after 5 minutes Reliability 0.50%/1,000 hours at 85C, V with 0.1 series resistance R KEMET Electronics Corporation KEMET Tower One East Broward Boulevard T2024 T489 11/6/2020 22 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com