Tantalum Surface Mount Capacitors Low ESR T495 Surge Robust MnO 2 Overview The low ESR, surge-robust T495 is designed for These benefits are achieved through a combination of demanding applications that require high surge current proprietary design, materials, and process parameters, as and high ripple current capability. The T495 builds upon well as high-stress, low impedance electrical conditioning the proven capabilities of our industrial grade tantalum performed prior to screening.The T495 is classified as chip capacitors to offer several advantages such as low moisture sensitivity level (MSL) 1 under J STD 020, with ESR, high ripple current capability, excellent capacitance unlimited floorlife time at 30C/85% RH. stability, and improved resistance to high in-rush currents. Benefits Meets or exceeds EIA Standard 535BAAC Tape & Reel standard packaging per EIA 481 High surge current capability Optional gold-plated terminations High ripple current capability 100% surge current test on B, C, D, E, U, V, and X sizes 100% steady-state accelerated aging Applications Typical applications include decoupling and filtering in many end applications, such as DC/DC converters, portable electronics, telecommunications, and control units requiring high ripple current capability. Environmental Compliance RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold-plated or Non-magnetic 100% Sn solder. Halogen-free Epoxy compliant with UL94 V-0 Molded Epoxy complies for outgassing testing under ASTM E 595. Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard T2009 T495 10/12/2021 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comTantalum Surface Mount Capacitors Low ESR T495 Surge Robust MnO 2 K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMETs K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information T 495 X 107 M 010 A T E045 Capacitor Case Capacitance Capacitance Rated Voltage Failure Rate/ Packaging Series Termination Finish ESR Class Size Code (pF) Tolerance (VDC) Design (C-Spec) T = Surge A, First two K = 10% 2R5 = 2.5 A = N/A T = 100% Matte tin E = ESR Blank = 7 reel Tantalum Robust B, digits M = 20% 004 = 4 (Sn)-plated last three 7280 = 13 reel Low C, represent 006 = 6.3 H = Standard solder digits specify ESR D, significant 010 = 10 coated ESR in m E, figures. Third 016 = 16 (SnPb 5% Pb minimum) (45 = 45 m) M, digit specifies 020 = 20 G = Gold-plated T, number of 025 = 25 (A, B, C, D, X only) U, zeros. 035 = 35 N = Non-magnetic 100% V, 050 = 50 tin (Sn) W, M = Non-magnetic (SnPb) X Performance Characteristics Item Performance Characteristics Operating Temperature 55C to 125C Rated Capacitance Range 0.47 1,000 F at 120 Hz/25C Capacitance Tolerance K tolerance (10%), M tolerance (20%) Rated Voltage Range 2.5 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current 0.01 CV (A) at rated voltage after 5 minutes KEMET Electronics Corporation KEMET Tower One East Broward Boulevard T2009 T495 10/12/2021 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com