T498B335K016ATE3K0 Kemet

Tantalum Surface Mount Capacitors Automotive Grade T498 Automotive Grade MnO 150C 2 Overview The KEMET T498 is a high temperature product that offers This series is classified as moisture sensitivity level (MSL) 1 optimum performance characteristics in applications with under J STD 020: unlimited floorlife time at 30C/85% RH. operating temperatures up to 150C. Advanced materials The T498 is available in five standard EIA case sizes, with and testing allow T498 AUTO to perform with a reliability RoHS compliant terminations as standard. level of 0.5%/1000 hours at rated voltage and temperature. Benefits Meets or exceeds EIA standard 535BAAC Tape & Reel standard packaging per EIA 481 Symmetrical, compliant terminations Optional gold-plated terminations Laser-marked case 100% surge current testing Complies with AECQ200 100% steady-state accelerated aging Temperature/voltage derating is 2/3 at 150C Applications Typical applications include decoupling and filtering in industrial and automotive end applications such as DC/DC converters, portable electronics, telecommunications, and control units operating at temperatures up to 150C. Environmental Compliance RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder or gold-plated. Halogen-free Epoxy compliant with UL94 V0 Molded Epoxy complies for outgassing testing under ASTM E 595. Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard T2053 T498 AUTO 6/8/2021 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comTantalum Surface Mount Capacitors Automotive Grade T498 Automotive Grade MnO 150C 2 K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information T 498 X 227 M 010 A T E500 Capacitor Case Capacitance Capacitance Rated Voltage Failure Rate/ Packaging Series Termination Finish ESR Class Size Code (pF) Tolerance (VDC) Design (C-Spec) T = High A First two digits K = 10% 004 = 4 A = N/A T = 100% Matte tin E = ESR Blank = 7 reel Tantalum Temperature B represent M = 20% 006 = 6.3 (Sn)-plated Last three 7280 = 13 reel 150C C significant 010 = 10 G = Gold-plated digits D figures. Third 016 = 16 H = Standard specify X digit specifies 020 = 20 solder coated ESR in m number of 025 = 25 (SnPb 5% Pb (500 = 500 zeros. 035 = 35 minimum) m) 050 = 50 Performance Characteristics Item Performance Characteristics Operating Temperature 55C to 150C Rated Capacitance Range 0.1 220 F at 120 Hz/25C Capacitance Tolerance K tolerance (10%), M tolerance (20%) Rated Voltage Range 4 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current 0.01 CV (A) at rated voltage after 5 minutes KEMET Electronics Corporation KEMET Tower One East Broward Boulevard T2053 T498 AUTO 6/8/2021 22 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com