T499B685K010ATE3K5 Kemet

Tantalum Surface Mount Capacitors Automotive Grade T499 Automotive Grade MnO 175C 2 Overview The KEMET T499 is a high-temperature product that offers T499 AUTO is classified as having moisture sensitivity level optimum performance characteristics in applications with (MSL) 1 under J STD 020: unlimited floorlife time at operating temperatures up to 175C. Advanced materials 30C/85% RH. T499 AUTO is available in five standard EIA and testing allow this series to perform with a reliability case sizes, with ROHS-compliant terminations as standard. level of 0.5%/1000 hours at rated voltage and temperature. Benefits Meets or exceeds EIA Standard 535BAAC Tape & Reel standard packaging per EIA 481 Symmetrical, compliant terminations Optional gold-plated terminations Laser-marked case 100% surge current testing Complies with AECQ200 100% steady-state accelerated aging Voltage derating is 1/2 at 175C Applications Typical applications include decoupling and filtering in industrial and automotive end applications, such as DC/DC converters, portable electronics, telecommunications, and control units operating at temperatures up to 175C. Environmental Compliance RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder or gold-plated. Halogen-free Epoxy compliant with UL94 V0 Molded Epoxy complies for outgassing testing under ASTM E 595. Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard T2054 T499 AUTO 8/17/2021 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comTantalum Surface Mount Capacitors Automotive Grade T499 Automotive Grade MnO 175C 2 K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMETs K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information T 499 X 227 M 010 A T E500 Rated Failure Capacitor Case Capacitance Capacitance Termination Packaging Series Voltage Rate/ ESR Class Size Code (pF) Tolerance Finish (C-Spec) (VDC) Design T = High A First two digits K = 10% 006 = 6.3 A = N/A T = 100% Matte tin E = ESR Blank = 7 reel Tantalum Temperature B represent M = 20% 010 = 10 (Sn)-plated Last three 7280 = 13 reel 175C C significant 016 = 16 G = Gold-plated digits 7027 = Moisture D figures. Third digit 020 = 20 H = Standard specify barrier bag X specifies number 025 = 25 solder coated ESR in m of zeros. 035 = 35 (SnPb 5% Pb (500 = 050 = 50 minimum) 500 m) Performance Characteristics Item Performance Characteristics Operating Temperature 55C to 175C Rated Capacitance Range 0.15 220 F at 120 Hz/25C Capacitance Tolerance K tolerance (10%), M tolerance (20%) Rated Voltage Range 6 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current 0.01 CV (A) at rated voltage after 5 minutes KEMET Electronics Corporation KEMET Tower One East Broward Boulevard T2054 T499 AUTO 8/17/2021 22 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com