Solid State Drives/High Energy Applications Polymer Electrolytic (KO-CAP ), 6.3 35 VDC Overview The KEMET Organic Capacitors (KO-CAP) are preferred provide very low ESR and higher capacitance retention at solutions for applications requiring power loss protection high frequencies. Unlike liquid electrolyte-based capacitors, (hold-up) or maximum power efficiency of a circuit when KEMET polymer capacitors have a very long operational board space is limited. Desired benefits include high life and high ripple current capabilities. Capacitors from energy density, stable capacitance with applied voltage T520, T521, and T523 series are commonly used in these and temperature, and no aging effects. The conductive applications. The T545 and T548 were introduced to meet polymer cathode of these solid electrolytic capacitors specific needs for a subsegment of solid state drives. Benefits Highest energy per unit volume Stable capacitance across temperature and voltage No aging effects Low ESR values High frequency capacitance retention High ripple handling 100% accelerated steady state aging 100% surge current tested Halogen-free epoxy and RoHS compliant Applications Typical applications include enterprise storage, networking, server, mobile, client storage, and client computing. T520 / T521 / T545 T523 / T548 Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard T2079 SSD 11/29/2021 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSolid State Drives/High Energy Applications Polymer Electrolytic (KO-CAP ), 6.3 35 VDC Environmental Compliance RoHS compliant when ordered with 100% Sn solder or Ni-Pd-Au Halogen-free Epoxy compliant with UL94 V0 K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMETs K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information T 548 V 157 M 016 A T E050 Rated Failure Capacitor Case Capacitance Capacitance Termination Packaging Series Voltage Rate/ ESR Class Size Code (pF) Tolerance Finish (C-Spec) (VDC) Design T = 520 = Low voltage B, G, First two digits K = 10% 006 = 6.3 A = N/A T = 100% matte tin ESR in m Blank = 7 reel Tantalum 521 = High voltage H, J, represent M = 20% 010 = 10 (Sn)-plated 7280 = 13 reel 523 = Facedown M, O, signicfi ant 016 = 16 P* = Ni-Pd-Au-plated terminal T, V, gfi ures. Third 020 = 20 545 = High energy W, X, digit speciefi s 025 = 25 548 = High energy, Y number of 035 = 35 facedown terminal zeros. * P termination only available on T523/T548 part numbers Performance Characteristics Item Performance Characteristics Operating Temperature 55C to 85C/125C (refer to part number in Table 1 for maximum temperature rating) Rated Capacitance Range 22 1,500 F at 120 Hz/25C Capacitance Tolerance K tolerance (10%), M tolerance (20%) Rated Voltage Range 6.3 35 VDC DF (120 Hz) Refer to part number in Table 1 for electrical specification ESR (100 kHz) Refer to part number in Table 1 for electrical specification 0.1 CV (A) at rated voltage after 5 minutes (refer to part number in Table 1 for electrical Leakage Current specification) KEMET Electronics Corporation KEMET Tower One East Broward Boulevard T2079 SSD 11/29/2021 22 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com