KEMET Organic Capacitor (KO-CAP ) Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 63 VDC Overview The KEMET Tantalum Stack Polymer (TSP) Electrolytic The TSP series is the first polymer electrolytic capacitor Capacitor is designed to provide the highest CV available with failure rate options when utilizing KEMET s (capacitance/voltage) ratings in a surface mount T540 and T541 Series. The failure rate is determined by configuration. All of KEMET s Polymer Electrolytic Solutions utilizing accelerated conditions (voltage and temperature) are available in a stack configur ation.The only exceptions applied to board mounted samples to assess long term are the facedown series (T523, T527, T528, and T529). device reliability. The failure rates available are B (0.1% per These capacitors are utilized in stacks of 2, 3, 4, and 6 1,000 hours), C (0.01% per 1,000 hours), and D (0.001% per components to achieve a broad range of capacitance, 1,000 hours). This method was developed based on over ten ESR, and voltage ratings. The TSP series may be operated (10) years of research and is described in numerous papers at steady state voltages up to 90% of rated voltage for available on www.kemet.com. part types with rated voltage less than or equal to 10 Note: Custom stacking solutions are also available with other KEMET volts and up to 80% of rated voltage for part types greater Polymer Electrolytic Surface Mount products. Please contact KEMET Sales than 10 volts. Stacking configur ations allow for custom for availability. capacitance/voltage solutions and very low ESR options. Benefits Polymer cathode technology High capacitance Surface mountable Capacitance values of 20 8,000 F Capacitance can be custom specified Voltage ratings of 3 63 VDC High volumetric efficiency Ultra low ESR Surge capability Operating temperature range of 55C to +105C/+125C (refer to part number for maximum temperature rating) Laser-marked case Use up to 90% of rated voltage for part types 10 V Use up to 80% of rated voltage for part types > 10 V KEMET s KO-CAP Reliability Assesment method (for the discrete component T540 and T541) Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard T2029 TSP 11/23/2021 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com KEMET Organic Capacitor (KO-CAP ) Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 63 VDC Applications Typical applications include decoupling, hold-up and filtering in a variety of market segments. The T540/T541 and T543 Polymer HRA and other tantalum MnO2 HRA and MIL-PRF stack devices can be utilized in defense and aerospace equipment including High Power Amplifiers for radars and multiple applications where GaN active components are part of the design. Environmental Compliance RoHS compliant when ordered with 100% Sn solder on both terminations (component and stack) Halogen-free Epoxy compliant with UL94 V-0 Molded Epoxy complies for outgassing testing under ASTM E 595. K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information T540/T541 Discrete Component T SP 2D 207 M 010 A H 65 20 D 540 Discrete Rated Failure Termination Termination Capacitor Case Capacitance Capacitance Surge ESR Series Voltage Rate Finish Finish Components Class Size Code (pF) Tolerance (Discrete) (Stack) (VDC) (Discrete) (Discrete) (Stack) Series T = Stacks 2B First two digits K = 10% 003 = 3 A = N/A H = Standard 65 = 4 cycles at 25C 5C 05 = ESR - High D = Silver-plated 540 = T540 Tantalum Polymer 3B represent M = 20% 004 = 4 B = 0.1%/ solder 66 = 10 cycles at 25C 10 = ESR - Standard (Ag) 541 = T541 Cathode 4B significant 006 = 6.3 KHrs coated 67 = 10 cycles at 55C 20 = ESR-Low H = Solder-plated 6B fig ures. Third 010 = 10 C = 0.01%/ (SnPb 5% Pb +0C/5C and 85C (SnPb 5% Pb 2C digit specifies 016 = 16 KHrs minimum) minimum) 3C number of 025 = 25 D = 0.001%/ 85 = 4 cycles at 25C 5C T = 100% Tin (Sn) 4C zeros. 035 = 35 KHrs T = 100% and improved humidity 6C 050 = 50 Matte Tin capability 2D 063 = 63 (Sn)-plated 86 = 10 cycles at 25C 5C 3D and improved humidity 4D capability 6D 87 = 10 cycles at 55C 2O +0C/5C and +85C 5C 3O and improved humidity 40 capability 6O 2X 3X 4X 6X KEMET Electronics Corporation KEMET Tower One East Broward Boulevard T2029 TSP 11/23/2021 22 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com