N2744A T2A Probe Interface Adapter Product Overview The Keysight Technologies, Inc. N2744A T2A interface Highlights adapter enables selected Tektronix TekProbe interface level II probes to be used with Keysight oscilloscopes Enables TekProbe-BNC level II probes to connect to with the AutoProbe I interface. Existing TekProbe-BNC Keysights AutoProbe interface on supported Keysight InfiniiVision and Infiniium oscilloscopes see compatibility probe types can simply be plugged into the T2A adapter, table for details which is then plugged directly into any AutoProbe input channel on an InfiniiVision or Infiniium oscilloscope. An easy-to-use plug-on adapter to the Keysight oscilloscopes AutoProbe interface Select the probe model in the probe menu, and the Keysight oscilloscope sets up the attenuation factor and Provides necessary power, offset control and calibration as the probe type automatically. The T2A interface adapter needed to the attached TekProbe probe supplies the necessary probe power and offset control as used by the connected TekProbe probe. The adapter is targeted for customers using both Tek active probes with TekProbe-BNC level II interfaces and Keysight oscilloscopes with the AutoProbe interface. TekProbe Compatibility The N2744A T2A adapter supports only the probes listed below. InfiniiVision Infiniium 1 2 2 3 3 3000X/T , 4000X, 5000 , 6000 , 9000 , 90000 , S-Series, EXR-Series, 2 3 3 6000X 7000 Probe / Probe Type MXR-Series, V-Series , Z-Series AC/DC Current Probe TCP202 Single-ended Active Probes P6243, P6245, P6205, P6241, P6249 Differential Active Probes 4 4 P5205/P5205A , P5210/P5210A P6246, P6247, P6248, P6250, P6251 Optical-to-Electrical Converters P6701B, P6703B, P6711, P6713 1. Software version 1.10 or higher. 2. Software version 06.16 or higher. N2744A is not compatible with 6000 100 MHz scope. 3. Software version 03.11 or higher. 4. On the oscilloscope, select P5205 in the probe listing when using a P5205A, and select P5210 in the probe listing when using a P5210A. N5442A InfiniiMax adapter required. Find us at www.keysight.com Page 1 Performance characteristics Electrical Bandwidth 4 GHz (adapter only) Power supplies +15 V, +5 V, -5 V, -15 V (each 2%) Max output current 200 mA for positive and negative supplies Offset control range 1 V (for the adapter) Max input voltage 42 VPEAK, 30 VRMS Environmental Operating temperature range 0 to +50 C Non-operating temperature range -40 to +70 C Humidity 95% RH at 50 C Altitude 4000 m Physical Dimensions 37 mm x 29.5 mm x 58 mm (W x L x D) Weight 45 g TEKTRONIX, TEK, and TEKPROBE are registered trademarks of Tektronix, Inc. Learn more at: www.keysight.com For more information on Keysight Technologies products, applications, or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Find us at www.keysight.com Page 2 This information is subject to change without notice. Keysight Technologies, 2011 2017, 2021, Published in USA, April 20, 2021, 5990-6477EN