Hi-Z+ Passive Probing System PP0001A, PP0002A, PP0003A and related accessories Passive Probes with Never Before Seen Performance With a small probe head, rugged and replaceable tips, automatic probe identification and attenuation, high voltage ranges and high input impedances with low capacitance this family of probes is truly the best of passive probes and active probes in one. Adapter Required PP0001A provides a never-before-seen combination of high bandwidth and higher input voltages. PP0002A is the only 800 MHz passive probe to provide more than 1 kV PP0001/2/3A all require of input voltage. PP0003A is our first ever MMCX compatible probe. All three are sold the use of PP0004A in with a variety of accessories, an adapter for use with AutoProbe I, and optional order to leverage the accessory kits to round out your test setup. AutoProbe I interface on applicable InfiniiVision X- Model Bandwidth Input voltage Input impedance Tip type Series and Infiniium oscilloscopes. In the PP0001A 1 GHz 300 V CAT II 10 M 4.0 pF 5 mm tip future, this adapter will be designed into the 800 MHz 1200 V CAT II 40 M 2.0 pF 5 mm tip PP0002A oscilloscope, but for now, ensure you have a 1 GHz 30 V CAT II 10 M 4.0 pF MMCX Connector PP0003A PP0004A adapter for every probe you need in Required Adapter your test setup. This adapter is sold as a This adapter is sold standard with the probes listed above but can be purchased separately. standard accessory with any of these probes. PP0004A Adapter for PP0001A, PP0002A, PP0003A Figure 1. From left to right: PP0001A, PP0002A, and PP0003A. Find us at www.keysight.com Page 1 List of Standard and Optional Accessories, Replacement Kits See the PP0001/2/3A Users Guide for images of each part, which may be helpful in identifying standard accessories and replacement parts below. Probe Standard accessories Re-orderable As Channel identification rings (4 each, in 4 colors) grabber hook tip ground clip ground spring PP0011A (x2) BNC to probe tip adapter PP0001A Probe tip cartridge, 300 V rating Protective tip covers (x2) PP0014A Adapter for PP0001A, PP0002A, PP0003A PP0004A Channel identification rings (4 each, in 4 colors) grabber hook tip ground clip ground spring PP0011A (x2) BNC to probe tip adapter PP0002A Probe tip cartridge, 1200 V rating Protective tip covers (x2) PP0018A Adapter for PP0001A, PP0002A, PP0003A PP0004A Channel identification rings (4 each, in 4 colors) red and black mini grabbers MMCX to PP0013A 0.025 square pin adapter PP0003A Adapter for PP0001A, PP0002A, PP0003A PP0004A Optional accessories Probe tip to 0.025 square pin adapter, 30 V rating (x2) Only for use with PP0017A PP0001A PCB to probe tip adapter, 300 V rating (x2) Probe tip to 0.025 square pin adapter, 30 V rating (x2) Only for use with PP0019A PP0002A PCB to probe tip adapter, 1200 V rating (x2) Related Literature Document Pub number PP000xA Users Guide PP0002-97000 Keysight Probes & Accessories 5989-6162 Overview Visit the Keysight Probe Resource Center for all information related to probes and accessories for all oscilloscope platforms at prc.keysight.com Figure 2. PP0004A ships in a convenient padded storage case, with space for an accompanying probe and accessories. Pictured here is the PP0004A in its case with a PP0001A. Learn more at: www.keysight.com For more information on Keysight Technologies products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Find us at www.keysight.com Page 2 This information is subject to change without notice. Keysight Technologies, 2021, Published in USA, April 29, 2021, 3121-1182.EN