Memory Module Speci cations KVR21L15Q4/32 32GB 4Rx4 4G x 72-Bit PC4-2133 CL15 Load Reduced w/Parity 288-Pin DIMM DESCRIPTION SPECIFICATIONS ValueRAM s KVR21L15Q4/32 is a 4G x 72-bit (32GB) CL(IDD) 15 cycles DDR4-2133 CL15 SDRAM (Synchronous DRAM) load reduced Row Cycle Time (tRCmin) 47.06ns(min.) w/ parity, 4Rx4, ECC, memory module, based on thirty-six 2G x 260ns(min.) Refresh to Active/Refresh 4-bit DDP FBGA components. The SPD is programmed to Command Time 1x mode (tRFCmin) JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Row Active Time (tRASmin) 33.00ns(min.) Each 288-pin DIMM uses gold contact fingers. The electrical Maximum Operating Power 6.55 W* and mechanical specifications are as follows: UL Rating 94 V - 0 o o Operating Temperature 0 C to +85 C o o Storage Temperature -55 C to +100 C FEATURES *Power will vary depending on the SDRAM used. Power Supply: VDD=1.2V (1.14V to 1.26V) VDDQ = 1.2V (1.14V to 1.26V) VPP - 2.5V (2.375V to 2.75V) VDDSPD=2.25V to 2.75V Functionality and operations comply with the DDR4 SDRAM datasheet 16 internal banks Bank Grouping is applied, and CAS to CAS latency (tCCD L, tCCD S) for the banks in the same or different bank group accesses are available Data transfer rates: PC4-2133, PC4-1866, PC4-1600 Bi-Directional Differential Data Strobe 8 bit pre-fetch Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop) Supports ECC error correction and detection On-Die Termination (ODT) Temperature sensor with integrated SPD This product is in compliance with the RoHS directive. Per DRAM Addressability is supported Internal Vref DQ level generation is available Write CRC is supported at all speed grades CA parity (Command/Address Parity) mode is supported Continued >> kingston.com Document No. VALUERAM1459-001.C00 02/24/15 Page 1MODULE DIMENSIONS Front Back kingston.com Document No. VALUERAM1459-001.C00 Page 2