KXTIK-1004-FR Kionix

KXTIK Accelerometer 3x3x0.9mm Accelerometer with FIFO/FILO Buffer FEATURES APPLICATIONS Small Package - 3x3x0.9mm LGA User Interface User-selectable g Range Active/Inactive Monitoring User-selectable Output Data Rate Device Orientation Enhanced integrated Directional Tap/Double- Gesture Recognition TM Tap , Activity-monitoring, and Device-orientation Tap Detection Algorithms Pedometer/Activity Monitoring 2 Digital I C 8-bit or 12-bit Resolution FOR FIFO/FILO Memory Buffer Smartphones and Mobile Devices Digital High-Pass and Low-Pass Filter Outputs Gaming and Virtual Reality Low Power Consumption Health and Fitness Lead-free Solderability Excellent Temperature Performance High Shock Survivability Factory Programmable Offset and Sensitivity Self-test Function PRODUCT OVERVIEW The Kionix KXTIK is a low power, high performance tri-axis 2 accelerometer with digital I C output. The KXTIK features user- selectable parameters including 8-bit or 12-bit modes, g-ranges from 2g, 4g or 8g, and Output Data Rates from 12.5 Hz to 800 Hz. A 252 byte FIFO/FILO buffer offers programmable watermark interrupt and provides a triggered low resolution or high resolution mode. The KXTIK features a 16-pin package, making it pin compatible with popular products on the market. The KXTIK also offers enhanced embedded Screen Rotation, Directional Tap/Double Tap, Orientation Detection and Low Power Motion Interrupt. The KXTIK has an internal voltage regulator that allows operation from 1.8 V to 3.6 V with an operating temperature range of -40C to +85C. KXTIK Accelerometer 3x3x0.9mm Accelerometer with FIFO/FILO Buffer The performance parameters below are programmed and tested at 2.6 volts and T = 25C. The device can accept supply voltages from 1.8V to 3.6V. Due to internal voltage regulators, there should be minimal change with supply voltage variations. PERFORMANCE SPECIFICATIONS PARAMETERS UNITS KXTIK-1004 CONDITION Range g 2.0, 4.0, 8.0 User-selectable full-scale output range 64, 32, 16 8-bit 1 Sensitivity counts/g 1024, 512, 256 12-bit 0g Offset vs. Temp mg/C 0.7 (xy) 0.4 (z) typical -40C to +85C Sensitivity vs. Temp %/C 0.01 (xy) 0.03 (z) typical -40C to +85C 2 Mechanical Resonance Hz 3500 (xy) 1800 (z) typical -3dB 3 Output Data Rate (ODR) Hz 12.5 min 50 typical 800 max kHz 1.59 RES = 0 4 Bandwidth (-3dB) Hz ODR/2 RES = 1 Non-Linearity % of FS 0.6 typical % of full scale output Cross-axis Sensitivity % 2.0 typical 2 I C Communication Rate kHz 400 max Power Supply V 2.6 typical 1.8V 3.6V 325 typical High resolution (RES = 1) TM Directional Tap RES = 0 ODR = 165 typical 400Hz Current Consumption A 100 typical Low resolution RES = 0 ODR 25Hz 10 typical Standby ENVIRONMENTAL SPECIFICATIONS PARAMETERS UNITS KXTIK-1004 CONDITION Operating Temperature C -40 to 85 Powered Storage Temperature C -55 to 150 Un-powered 5,000, 0.5 ms Powered or un-powered, Mechanical Shock g 10,000, 0.2 ms halversine ESD V 2,000 Human body model NOTES 1 Resolution and acceleration ranges are user selectable via I2C. 2 Resonance as defined by the dampened mechanical sensor. 3 User selectable through I2C. 4 User selectable dependent on ODR and RES.