CCF1F chip current fuses (anti-sulfuration) EU features Meets IEC60127-4 specifications (7A or less) Stable fusing characteristics due to original technology Suitable for reflow and flow soldering Products meet EU RoHS requirements Excellent anti-sulfuration characteristics due to using high sulfuration-proof material dimensions and construction Ceramic Case c Dimensions inches (mm) L Type L Wt c CCF1F .236.008 .098.008 .098.008 .055.008 c (2410) (6.00.2) (2.50.2) (2.50.2) (1.40.2) t Electrode Cap Fuse Element W ordering information CCF 1 F 1 T TE Fusing Rated Termination Type Style Packaging Characteristic Current Surface Material F: Fast-acting T: Sn TE: 4mm pitch plastic embossed BK: Bulk applications and ratings Fusing Normal Operating Part Current Voltage Interrupting Internal R. Characteristics Melting Temperature Designation Rating Rating Capacity (m) Max. Rated Fusing 2 2 l t (A , sec.) Range Current Time CCF1F0.4 0.4A 650 0.024 CCF1F0.5 0.5A 510 0.030 CCF1F0.63 0.63A 390 0.052 CCF1F0.8 0.8A 250 0.125 UL(c-UL) UL(c-UL) UL(c-UL) -55C 4 hour min. CCF1F1 1A AC 125V AC125V 50A 100% 90.4 0.156 to 60 sec. max. DC 125V DC125V 50A 200% +125C CCF1F1.25 1.25A 75.9 0.220 CCF1F1.6 1.6A 59.3 0.513 CCF1F2 2A 42.9 0.814 CCF1F2.5 2.5A 36.6 1.31 For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/12/17 KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com 265 circuit protectioncircuit protection CCF1F chip current fuses (anti-sulfuration) applications and ratings (continued) Fusing Normal Operating Part Current Voltage Interrupting Characteristics Internal R. Melting Temperature Designation Rating Rating Capacity Rated Fusing (m) Max. 2 2 l t (A , sec.) Range Current Time CCF1F3.15 3.15A 26.0 2.37 CCF1F4 4A 20.1 3.85 CCF1F5 5A 15.3 6.5 UL(c-UL) UL(c-UL) CCF1F6.3 6.3A AC 125V AC125V 50A 11.4 10.6 -55C UL(c-UL) DC 125V DC125V 50A CCF1F7 7A 4 hour min. 10.6 12.8 to 100% 60 sec. max. +125C CCF1F8 8A 9.5 17.0 200% CCF1F10 10A 7.5 27.7 UL(c-UL) UL(c-UL) CCF1F12 12A 4.5 73.5 AC 65V AC65V 50A CCF1F15 15A 3.5 125.5 DC 65V DC65V 50A environmental applications Derating Curve Fusing Characteristics 0.4A 0.5A 0.63A 0.8A1A 1.25A 1.6A2A 2.5A3.154A4A 5A 6.3A7A 8A 10A 12A 15A 1.5 10 1.4 1.3 1.2 1 1.1 1.0 0.1 0.9 0.8 0.7 0.01 0.6 0.5 -55 -35 -15 5 25 45 65 85 105 125 0.001 0.1 1 10 100 1000 Ambient Temperature Fusing Current (A) (C) Stationary Current: Regard the peak of stationary current waveform as stationary current value when the stationary current is repeated pulse. Normal derating of this product should be 0.7max. as standards. Deratings by ambient temperatures. When using the products at the temperatures other than normal temperature (25C 5), temperature adjustment will be required. Please refer the derating coefficient as shown in the figure. Performance Characteristics Requirements Parameter Limit Typical Test Method Within specified time. Insulation Fusing Characteristics Fusing time measured under rated current x 200%) (at 25C) resistance shall not be less than 0.1M Maximum temperature rise 75C Surface Temperature Rise Surface temperature should be measured by 1.00/N and not fusing (all the rating) No mechanical Distance between holding points 90mm, bent by 3mm at rate Bending Test damage of 1mm/second Resistance to Soldering Heat 3% 260C 5C, 10 seconds 0.5 seconds R10% Solderability 95% coverage minimum 235C 5C, 3 seconds 0.5 seconds 70C 2C, 1000 hours, rated current x 70%, 5% Load Life R10% 1.5 hr ON, 0.5 hr OFF cycle 40C 2C, 90 - 95% RH, 1000 hours, rated current x 70%, Load Life Moisture 5% R10% 1.5 hr ON, 0.5 hr OFF cycle Rapid Change of Temperature 5% -55C (30 minutes), +125C (30 minutes), 100 cycles R10% Soaked in industrial oil with 3.5% sulfur concentration, 105C3C, Sulfuration Test R5% 500 hours Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/12/17 266 KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com Derating Coefficient Number Fusing Time (s)