circuit protection NV73DL multilayer type metal oxide varistor (automotive) EU features SMD type metal oxide varistors Ideal for countermeasures against ESD (Conforming to IEC61000-4-2) High maximum energy type Low leakage current High resistance to cyclic temperature stress Suitable for both flow and reflow soldering Products with lead-free terminations meet EU RoHS requirements. Pb located in glass material, electrode and varistor element is exempt per Annex 1, exemption 5 of EU directive 2005/95/EC. dimensions and AEC-Q200 Qualified construction L Type Dimensions inches (mm) d d (Inch Size Code) L Wt d 1J .063.006 .031.006 .039 max016.006 W (0603) (1.60.15) (0.80.15) (1.0 max.) (0.40.15) Sn Plating 2A .079.010 .049.008 .051 max020.010 (0805) (2.00.25) (1.250.2) (1.30 max.) (0.50.25) Ni t Plating 2B .126.012 .063.012 .057 max022.012 (1206) (3.20.3) (1.60.3) (1.45 max.) (0.550.3) Inner Side Inner Varistor Electrode Electrode Element ordering information NV73 DL 2A T TE 27 Energy Termination Varistor Type Size Packaging Code Material Voltage 1J: 1.6 x 0.08 T: Sn TE: 7 embossed plastic 2A: 2.0 x 1.2 2B: 3.2 x 1.6 applications and ratings Maximum Clamping Maximum Short-Time Capacitance Varistor Maximum Allowable Maximum Part Voltage (V) Peak Current Applied (Typ) Voltage (V) Voltage Energy Designation 8/20s (A) Voltage 1kHz (J) 1 time (5 min) (V DC) (pF) V A.C. (V ) D.C. (V) V V 1m A r.m .s. 1A 2A NV73DL1JTTE12 10~14.4 6.1 8.6 24 0.1 80 10 630 NV73DL1JTTE22 22~27 14 16 42 0.2 100 24.5 390 NV73DL1JTTE27 24~32 17 22 50 0.2 100 24.5 320 NV73DL1JTTE33 33~39 20 26 60 0.3 100 24.5 200 NV73DL1JTTE47 40~54 30 34 81 0.3 100 42 130 NV73DL2ATTE12 10~14.4 6.1 8.6 24 0.1 120 10 1070 NV73DL2ATTE22 22~27 14 16 42 0.3 160 24.5 610 NV73DL2ATTE27 24~32 17 22 50 0.3 160 24.5 580 NV73DL2ATTE33 33~39 20 26 60 0.3 160 24.5 380 NV73DL2ATTE47 40~54 30 34 81 0.3 160 42 260 NV73DL2ATTE68 62~72 45 56 108 0.3 160 64 190 NV73DL2ATTE82 74~90 50 65 135 0.3 160 75 105 For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/19/17 274 KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.comNV73DL multilayer type metal oxide varistor (automotive) applications and ratings (continued) Maximum Clamping Maximum Short-Time Capacitance Varistor Maximum Allowable Maximum Part Voltage (V) Peak Current Applied (Typ) Voltage (V) Voltage Energy Designation 8/20s (A) Voltage 1kHz (J) 1 time (5 min) (V DC) (pF) V A.C.(V ) D.C.(V) V V 1m A r.m .s. 1A 2A NV73DL2BTTE22 22~27 14 16 42 1 300 24.5 1600 NV73DL2BTTE27 24~32 17 22 50 1 300 24.5 1360 NV73DL2BTTE33 33~39 20 26 60 1 300 24.5 870 NV73DL2BTTE68 62~72 45 56 108 1.5 300 64 380 NV73DL2BTTE82 74~90 50 65 135 1.5 300 75 250 Operating temperature range: -40C to +125C Storage temperature range: -40C to +150C environmental applications Voltage Current Curves (Ta = +25C) NV73DL1J NV73DL2A NV73DL2B 1000 1000 1000 Leakage Current Clamping Voltage Leakage Current Clamping Voltage Clamping Voltage Leakage Current NV73DL2ATTE82 NV73DL2BTTE82 NV73DL2ATTE68 NV73DL2BTTE68 NV73DL1JTTE47 NV73DL2ATTE47 NV73DL2BTTE33 NV73DL1JTTE33 NV73DL2ATTE33 NV73DL2BTTE27 NV73DL1JTTE27 NV73DL2ATTE27 NV73DL2BTTE22 NV73DL1JTTE22 100 NV73DL2ATTE22 100 100 NV73DL1JTTE12 NV73DL2ATTE12 10 10 10 1 1 1 6 5 4 3 2 1 0 1 2 3 6 5 4 3 2 1 0 1 2 3 6 5 4 3 2 1 0 1 2 3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Current (A) Current (A) Current (A) Performance Characteristics Parameter Requirement V1mA% Test Method Varistor Voltage Within specified tolerance Voltage between terminals when 1mA and 10mA are flowed 95% coverage minimum Solderability 230C 5C, 5 seconds 0.5 second (Ag-Pd: 75% coverage min.) Resistance to Solder Heat 10% 260C 5C, 10 seconds 0.5 second Rapid Change of Temperature 10% -40C (30 minutes)/ +125C (30 minutes), 1000 cycles Maximum value of D.C. voltage that can be applied for a short period of time Short-Time Applied Voltage 10% (5 min.) (NV73D2A 12: 1 min.) Maximum Peak Current 10% A single standard impulse current of 8/20 seconds is applied Maximum Energy 10% A single standard impulse of 2m second, once Electrostatic Discharge 10% 25kV (Non contact) (NV73DL1J12, NV73DL2A12: 15kV (Non contact)) No visible damage. No remarkable Vibration frequency: 10Hz~2000Hz Full amplitude: 1.5mm, Vibration Resistance mechanical damage 10Hz~2000Hz~10Hz 20 min. XYZ direction 4 hrs for each total 12 hrs High Temperature Life 125C 2C, 1000h, Applied voltage: Varistor voltage (V1 ) x 0.85 10% ma with d.c. Bias High Temperature & High 10% 85C 2C, 85% RH, 1000h, Applied voltage: Varistor voltage (V1 ) x 0.85 ma Humidity Life with Bias Thermal Shock 10% -55C (15 min.)/ +125C (15 min.) 300 cycles 2 Shock 10% Half sine wave, Applied time: 1m second, Applied cycle: 500m/s , 5 cycles High Temperature Storage 10% 150C, 1000h Low Temperature Storage 10% -40C, 1000h Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/12/17 KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com 275 Voltage (V) Voltage (V) Voltage (V) circuit protection