resistors HPC/PCF ceramic fixed power type leaded resistor EU features PCF series: Coated with UL94V0 flameproof material Suitable for automatic machine insertion Able to replace carbon composition resistors in most applications Marking: HFC size: Reddish brown body color with alpha-numeric marking, PCF size: Light green body color with color-coded bands Products with lead-free terminations meet EU RoHS requirements Higher reliability against disconnection compared to wirewound resistors and film resistors AEC-Q200 Qualified: HPC only dimensions and construction Dimensions inches (mm) HPC Inner Type L C (max.) D d (nom.) l Electrode Resistive .433.039 .138.039 Body HPC1/2 Marking Electrode (11.02.0) (3.51.0) Cap Coating 0.630.039 .177.039 HPC1 (16.02.0) (4.51.0) .031 10K (0.8) Lead .827.039 .197.039 3mm Max. HPC2 Wire (21.02.0) (5.01.0) 1.50.118 L D (38.03.0) 1.02.039 .236.039 HPC3 (26.02.0) (6.01.0) 1.50.039 .276.039 HPC4 PCF C (38.02.0) (7.01.0) .039 (1.0) Inner 1.73.039 .295.039 HPC5 Electrode (44.02.0) (7.51.0) Resistive Body .354.039 .437 .138.02 .028 1.18.118 PCF1/2 (9.01.0) (11.1) (3.50.5) (0.7) (30.03.0) 0.65.039 .748 .217.039 PCF1 (16.51.0) (19.0) (5.51.0) .031 1.50.118 (0.8) (38.03.0) Lead .748.039 .886 .276.039 PCF2 Marking Coating Wire Electrode (19.01.0) (22.5) (7.01.0) Cap L D ordering information Part PCF 1/2 C T631 R 102 K Power Termination Nominal Type Taping Packaging Tolerance Rating Material Resistance HPC 1/2: 0.5W C: SnCu 1/2: T52 A: Ammo 2 significant K: 10% figures + 1 PCF 1: 1W 1: T631 R: Reel M: 20% multiplier 2: 2W 3 significant 3: 3W figures + 1 4: 4W multiplier 5: 5W For further information on packaging, please refer to Appendix C. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/18/12 122 KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com d dHPC/PCF ceramic fixed power type leaded resistor applications and ratings Resistance Minimum Absolute Absolute Absolute Power Operating Range Part Dielectric Resistance T.C.R. Maximum Maximum Maximum Rating Temperature E-12 (10%) Designation Withstanding Tolerance (ppm/C) Working Overload Pulse 70C Range E-6 (20%) Voltage Voltage Voltage Voltage* HPC1/2 0.5W 200V 400V 8kV 10 - 390K HPC1 1.0W 300V 600V 15kV -900300: (+10%) HPC2 2.0W 400V 800V 25kV R<100 HPC3 3.0W -1200300: 450V 900V 25kV 3.3 - 330K -40C R100 (+20%) to HPC4 4.0W 500V 1000V 25kV K: 10% +200C M: 20% HPC5 5.0W 550V 1100V 25kV -900300: PCF1/2 0.5W 4.7 - 100K 200V 400V 10kV 500V R<100 PCF1 1.0W 300V 600V 14kV -1300+300: 3.3 - 390K PCF2 2.0W 700V 400V 800V 20kV R100 * Resistance to pulse: change shall be 5% of the pre-test values. 1 sec. ON, 1 second OFF, 10,000 cycles. The voltage is applied with maximum pulse voltage. environmental applications Derating Curve PCF HPC 100 100 80 80 For resistors operated at an For resistors operated at an 60 60 ambient temperature of 70C ambient temperature of 40C 40 40 or above, a power rating shall be or above, a power rating shall be derated in accordance with the derated in accordance with the 20 20 above derating curve. above derating curve. 0 0 -60 -40 -20 0 20 40 60801001120 140 160 80 200 -60 -40 -200620 0 80 100 120 140 160 180 200 40 70 Ambient Temperature Ambient Temperature (C) (C) Performance Characteristics Requirement R (% + 0.05) Parameter Test Method Limit Typical Resistance Measurement voltage 3.3~8.2 0.3V Within regulated 25C Resistance to tolerance 10~82 1.0V 100~390k 3.0V -6 HPC: -900300x10 /K: R<100 HPC: +25C/-40C and +25C/+125C -6 -1200300x10 /K:R100 T.C.R PCF: +25C/-40C, +25C/+75C and +25C/+125C PCF: -900300:R<100 -1300300:R>100 0~-0.2%/V (HPC1/2, PCF) Voltage Coefficient Rated voltage and rated voltage x 10% 0~-0.1%/V (HPC1) (Apply for over 1k) 0~-0.05%/V (HPC2,3,4,5) Overload 2% 0.4% Rated voltage x 2.5 or maximum overload voltage for 5s, whichever less 1 sec ON The resistor mounted to the test circuit as below. SW Protection 1 sec OFF 1 sec. ON and 1 sec. OFF. 10,000 cycles. resistor The voltage is applied with maximum Rx Resistance to pulse 5% pulse voltage. DC C=1.000pF (HPC: In (Max. pulse insulation oil) voltage) Resistance to soldering heat 2% 0.8% 350C10C, 3.5s0.5s Rapid change of temperature 2% 0.4% -40C(30min.)/+85C(30min.), 5 cycles Moisture resistance 5% 0.6% 40C2C, 90%~95%RH, 1000h, 1.5h ON/0, 5h OFF cycles HPC: 40C2C, 1000h, 1.5h ON/0, 5h OFF cycles Load life 5% 0.4% PCF: 70C3C, 1000h, 1.5h ON/0, 5h OFF cycles No abnormality in Dipping in IPA or Xylene for 3 minutes and leaving for 10 minutes after removing drops, Resistance to Solvent appearance. Marking then brushing 10 times. shall be easily legible. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 1/05/13 KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com 123 % Rated Power % Rated Power resistors