RK73H
precision 0.5%, 1% tolerance
thick film chip resistor
EU
features
Marking: 1F, 1H: no marking, black body
1E: blue body, no marking
1J: three-digit black marking (E-24 only)
on blue protective coat. 2A ~ 3A four-digit
black marking on blue protective coat.
Products with lead-free terminations meet EU RoHS
requirements. EU RoHS regulation is not intended for
Pb-glass contained in electrode, resistor element and glass.
AEC-Q200 Qualified: 0201 (1H), 0402 (1E), 0603 (1J), 0805 (2A),
1206 (2B), 1210 (2E), 2010 (2H/W2H), 2512 (3A/W3A/W3A2)
dimensions
Type* Dimensions inches (mm)
(Inch Size Code)
L W c d t
and construction
1F
.016.0008 .008.0008 .004.001 .004.001 .005.0008
L
c c
(01005)
(0.40.02) (0.20.02) (0.10.03) (0.110.03) (0.130.02)
1H .024.001 .012.001 .004.002 .006.002 .009.001
W
(0201) (0.60.03) (0.30.03) (0.10.05) (0.150.05) (0.230.03)
Solder
+.004 +.002
Plating
.039 .01
1E -.002 .02.002 .008.004 -.004 .014.002
Ni
t
+0.1 +0.05
(0402) (0.50.05) (0.20.1) (0.350.05)
Plating
(1.0 ) (0.25 )
-0.05 -0.1
d Protective Resistive Inner
1J .063.008 .031.004 .012.004 .012.004 .018.004
Coating Film Electrode
(0603) (1.60.2) (0.80.1) (0.30.1) (0.30.1) (0.450.1)
Ceramic
Substrate
+.008
.012
2A .079.008 .049.004 .016.008 -.004 .02.004
Derating Curve
(0805) (2.00.2) (1.250.1) (0.40.2) +0.2 (0.50.1)
(0.3 )
100 100 -0.1
80 80 2B .063.008
1E, 1J, 2A, 2B, 2E,
W2H, W3A (1W)
(1206) (1.60.2)
.126.008
60 60
W3A2
+.008
(3.20.2) .016
2E .102.008
-.004
40 40
1F 1E, 1H, 1J, 2A, 2B, 2E, 2H,
3A, W2H, W3A
3A, W2H, W3A (1210) (2.60.2) +0.2
(0.4 )
-0.1
20 20
2H
0 0
(2010)
0 2040 60 80 100120 140 160180 -60 -40 -20 0 20 40 60 80 100 120 140 160 .197.008 .098.008
70 125 155 -55 95 125 155
.02.012 .024.004
Ambient Temperature Terminal Part Temperature (5.00.2) (2.50.2)
W2H .026.006
(C) (C)
(0.50.3) (0.60.1)
(2010) (0.650.15)
For resistors operated at an ambient For resistors operated at a terminal part
+.008
temperature of 70C or above, a power temperature of described for each size or
.016
3A
-.004
rating shall be derated in accordance above, a power rating shall be derated in
(2512) +0.2
(0.4 )
with the above derating curve. accordance with the above derating curve. .248.008 .122.008
-0.1
Please refer to Introduction of the derating (6.30.2) (3.10.2)
W3A/W3A2 .026.006
curve based on the terminal part temperature
(2512) (0.650.15)
in the beginning of our catalog before use.
* Parentheses indicate EIA package size codes.
ordering information
New Part #
RK73H 2B T TD 1003 F
Termination Nominal
Type Size Packaging Tolerance
Material Resistance
TX: 01005 only: 4mm width - 1mm pitch plastic embossed
1F T: Sn 3 significant D: 0.5%
TBL: 01005 only: 2mm pitch pressed paper
1H (1F ~ W3A2) figures + 1
F: 1%
TA: 0201 only: 1mm pitch pressed paper
Contact factory multiplier
1E
TC: 0201 only: 7" 2mm pitch pressed paper
for below
R indicates
1J
(TC: 10,000 pcs/reel, TCM: 15,000 pcs/reel)
options:
decimal on
2A TCD: 0201 only: 10" 2mm pitch pressed paper
L: SnPb value <100
TPD: 0402 only: 10" plastic embossed
2B
(1E, 1J, 2A, 2B,
TPL: 0402 only: 2mm pitch punch paper
2E 2E, 2H, 3A)
TP: 0402, 0603, 0805: 7" 2mm pitch punch paper
W2H G: Au
TD: 0603, 0805, 1206, 1210:
(1E ~ 2A:
W3A 7" 4mm pitch punched paper
10 ~ 1M)
TDD: 0603, 0805, 1206, 1210: 10" paper tape
2H
TE: 0805, 1206, 1210, 2010 & 2512:
3A
7" embossed plastic
New W3A2
TED:0805, 1206, 1210, 2010 & 2512: 10" embossed plastic
For further information on packaging, please refer to Appendix A
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/15/16
KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com 15
% Rated Power
resistorsresistors
RK73H
precision 0.5%, 1% tolerance
thick film chip resistor
applications and ratings
Rated
Resistance Range
Maximum Maximum Operating
Rated
Part Power Terminal T.C.R.
Working Overload Temperature
Ambient
-6
D0.5% F1%
Designation Rating Part (x10 /K)
Voltage Voltage Range
Temp.
E-24, E-96 E-24, E-96
Temp.
1
200 100k - 1M
RK73H1F -55C to
0.03W 20V 30V
1
(01005) +125C
250 10 - 91k
1
200 10 - 1M 10 - 10M
RK73H1H
0.05W 25V 50V
1
(0201)
400 1.0 - 9.1
100 10 - 1M 10 - 1M
RK73H1E
0.1W
50V
1.0 - 9.76
(0402)
200
1.02M - 10M
100V
100 1.02k - 1M 1.02k - 1M
0.1W
200
1.02M - 10M
RK73H1J
75V
(0603)
10 - 1k
100 10 - 1k
0.125W
1.0 - 9.76
200
100 10 - 1M 10 - 1M
RK73H2A
1.0 - 9.76
0.25W 200 150V 200V
(0805)
70C
400 1.02M - 10M
100 10 - 1M 10 - 1M
RK73H2B 1.0 - 9.76
0.25W
-55C to
125C
(1206) 1.02M - 5.6M
+155C
400 5.62M - 10M
100
10 - 1M 10 - 1M
1.0 - 9.76
RK73H2E
200
0.5W
1.02M - 5.6M
(1210)
200V 400V
400 5.62M - 10M
100 10 - 1M
10 - 1M
1.0 - 9.76
RK73HW2H/2H
0.75W 200
1.02M - 5.6M
(2010)
400 5.62M - 10M
100 10 - 1M 10 - 1M
1.0 - 9.76
RK73HW3A/3A 200V* 400V*
1.0W 200
1.02M - 5.6M
(2512) (500V) (500V)
400 5.62M - 10M
100 10 - 1M 10 - 1M
1.0 - 9.76
RK73HW3A2
2.0W 95C 200
200V 400V
1.02M - 5.6M
(2512)
5.62M - 10M
400
1
Rated voltage = Power rating x resistance value or max. working voltage, whichever is lower 1F: 10~1M: E-24. 1H: 1.0~9.1, 1M~10M: E-24. If any questions arise whether to use the Rated Ambient Temperature or
the Rated Terminal Part Temperature, please give priority to the Rated Terminal Part Temperature. Prior to use and for more
details refer to Introduction of the derating curves based on the terminal part temperature in the beginning of the catalog.
environmental applications *Contact KOA prior to usage for Max. Working Voltage and Max. Overload Voltage. While using under high power, the tempera-
ture of the product may increase depending on the condition of heat dissipation from PCB. Be sure to check the terminal part
Performance Characteristics temperature as well as precautions to use on delivery specification before use.
Requirement R (%+0.1 )
Parameter Limit Typical Test Method
Resistance Within specified tolerance 25C
T.C.R. Within specified T.C.R. +25C/-55C and +25C/+125C
1%: 1F
Rated Voltage x 2.5 for 5 seconds
Overload (Short time) 2%
0.5% Another
(1E, 2B, W3A2: Rated Voltage x 2 for 5 seconds)
1%: 1F ~ W3A2 0.5%: 1F ~ W3A2
Resistance to Soldering Heat (10R1M); 3%: 1H ~ (10<R<1M); 1%: 1H ~ 260C 5C, 10 seconds 1 second
W3A2 (R<10, R>1M) W3A2 (R<10, R>1M)
1%: 1F 0.5%: 1F
Rapid Change of Temperature -55C (30 minutes), +125C (30 minutes), 100 cycles
0.5% Another 0.3% Another
2%: 1J, 2A, 2B 0.75%: 1J, 2A, 2B; 40C 2C, 90%-95% RH, 1000 hours, 1.5 hr ON,
Moisture Resistance
3%: Another 1.5%:1F, 1%: Another 0.5 hr OFF cycle
2%: 1J, 2A, 2B 0.75%: 1J, 2A, 2B
Endurance at 70C 70C 2C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
3%: Another 1%: Another
+125C, 1000 hours: 1F; +155C, 1000 hours: 1E, 1H,
0.5%: 1F
High Temperature Exposure 1%
1J, 2A, 2B, 2E, 2H/W2H, 3A/W3A/W3A2
0.3%: Another
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/15/16
16 KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com
200
NEW