leaded resistors , Z J zero ohm jumpers EU features Type Z are conformal coated Type J are molded Suitable for automatic machine insertion Size compatible with 1/8, 1/4 and 1/2 watt resistors Marking: Type Z are tan color, single black band identifier Type J are black, no marking Products with lead-free terminations meet EU RoHS and China RoHS requirements dimensions and construction Type Z D L l Dimensions inches (mm) 1 l 1 Type L (ref.) C (max.) D d (nom.) Standard Long d +.008 .067 .126.008 .134 -.004 .018 Z16 2 3 +0.2 (3.20.2) (3.4) (0.45) (1.7 ) .551 Min787 Min. -0.1 (14.0 Min.) (20.0 Min.) .240.02 .091.012 Z25 Insulation Marking Resistive End Lead (6.10.5) (2.30.3) Coating Film Cap Wire .280 .024 +.016 +.118 .087 1.18 C (7.1) (0.6) .228 -.008 -.16 Z25Y +0.4 +3.0 (5.8) (2.2 ) (30.0 ) -0.2 -4.0 Type J D L l +.004 .134 -.008 .067.008 .020 J1/6Z +0.1 d (1.70.2) (0.5) (3.4 ) 1.18.118 -0.2 (30.03.0) +0 .091 .256.02 -.012 .024 J1/4Z +0 (6.50.5) (0.6) (2.3 ) -0.3 1 Lead length changes depending on taping and forming type. Molded Resin Solder Plated 2 Copper Wire Forming code S is applied for bulk type. 3 Long type is custom-made. ordering information Z16 C T52 A Type Termination Material Taping and Forming Packaging Z16 C: SnCu T26, T52 A: Ammo Z25 R: Reel Z25Y J1/4Z J1/6Z For further information on packaging, please refer to Appendix C. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/27/18 146 KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com, Z J zero ohm jumpers applications and ratings Minimum Rated Operating Part Maximum Dielectric Resistance Ambient Temperature Designation Amperage Withstanding Temperature Range Voltage Z16 1.5A 300V Z25 2.5A 500V 20m or less +70C -55C to +155C Z25Y 15A 500V Rated Operating Part Maximum Ambient Temperature Designation Allowable Current Temperature Range J1/6ZC 8A +70C -55C to +125C J1/4ZC 10A environmental applications Derating Curve 15 Z25Y 12 J1/4Z 9 J1/6Z 6 Z25 3 Z16 0 -80 -40 040 80 120 160 -55 70 125 155 Ambient Temperature (C) For resistors operated at an ambient temperature of 70C or above, a power rating shall be derated in accordance with the above derating curve. Performance Characteristics Parameter Requirement Test Method JIS C5201-1 Resistance Measuring points are 10mm 1mm from the end cap Less than 20m Terminal except 3mm shall be immersed in the solder, 350C 5C, Resistance to Solder Heat 3.5 seconds 0.5 second Solderability 90% coverage minimum 235C 5C, 2 seconds 0.5 second (Direct Load) Z16: 5N, 30 seconds, Z25: 10N, 30 seconds Terminal Strength No mechanical damages (Twist Test) 360, 5 times (Bending Test) 5N, 90, 2 times (Z16: 2.5N) Rapid Change of Temperature -55C (30 minutes)/+85C (30 minutes), 5 cycles Moisture Resistance Less than 20m 40C 2C, 90-95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle Endurance 70C 70C 2C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle No visible damages to protective Isopropyl alcohol with ultrasonic cleansing for 2 minutes Solvent Resistance 2 coating and marking Power: 0.3W/cm , f: 28kHz, Temperature: 35C 5C Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/29/16 KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com 147 Amps leaded resistors