A9F4C0B Konica Minolta

OLED module with NFC Antenna / A9F4C0B A9F4C0B Data sheet ( A9F4-S104-12 ) 1. Application This specification applies to the A9F4C0B OLED module. This module can be operated with NFC reader / writer. Product Overview Item Specifications Product Name OLED Module with NFC Antenna Color Red Active Area 15.25 mm 15.6 mm Panel Size 25.9 mm 21.4 mm External Size 32.0 mm 69.4 mm Operating frequency 13.56 MHz On-board NFC tag IC NTAG213F (NXP) 2. Operating conditions Parameter Symbol Min. Typ. Max. Unit Operating temperature *1 Top -10 25 60 C *1. Ambient temperature (TA) 3. Absolute Maximum Ratings Parameter Value Symbol Unit Absolute operating temperature *1 Top -20 ~ +70 C Absolute storage temperature *1 Tstg -20 ~ +85 C *1. Ambient temperature (TA) 4. Electrical/Optical parameters Typ. Parameter Symbol Condition Min. Max. Unit Brightness *1*2*3 Lv *2 500 cd/m Chromaticity Cx 0.687 0.697 0.707 - TA=25 coordinate x *1*2*3 Chromaticity Cy 0.293 0.303 0.313 - coordinate y *1*2*3 *1. Initial data *2. NFC reader / writer uses PaSoRi RC-S380(Sony). The distance between the NFC reader / writer and the OLED module is 0mm. *3. These values are measured at the center of the Active area. *4. Uneven brightness or pattern is not a malfunction. *5. In the initial state at the time of delivery, the dark spots stating below shall be allowable. - Under 0.3mm diameter can be ignored - 0.3mm~1.5mm diameter under 20 pieces/panel Regardless of the above, ignore dark spots within 1 mm from the active area outline. KONICA MINOLTA, INC. 1A9F4C0B Data sheet ( A9F4-S104-12) 5. Mechanical parameters <Bending conditions> Use the module under following bending conditions. * Bending in a direction different from the figure is not recommended. <Emission side view> KONICA MINOLTA, INC. 2