Inclinometers Inclinometer MEMS / capacitive IS40, 1-dimensional Analog With the IS40 inclinometer 1-dimensional inclinations in the measuring range 0 - 360 can be measured. The compact robust construction makes this sensor the ideal device for measuring angles in harsh environments. RoHS mA, V IP Output High protection Shock / vibration Reverse polarity level resistant protection Innovative Compact / Many applications Rugged construction high shock resistance. Small design minimal space requirement. High resolution and accuracy. For use in vehicle technology, solar installations, cranes and hoists or in commercial vehicles. Current or voltage interface. Adjusting of the measuring range via teach adapter. Order code 8.IS40 . 1 4 X 2 1 Type a b c d e Inclinometer IS40 a b c d e Measuring direction Measuring range Interface Power supply Type of connection 1 = 1-dimensional 4 = 0 ... 360 1 = 4 ... 20 mA 2 = 10 ... 30 V DC 1 = M12 connector 3 = 0.1 ... 4.9 V DC Accessories Order no. Teach adapter for inductive encoders, linear position, angle and ultrasonic sensors 05.TX40.1 Connection technology Order no. Cordset, pre-assembled M12 female connector with coupling nut, 5-pin 2 m 6.56 PVC cable 05.00.6081.2211.002M Connector, self-assembly (straight) M12 female connector with coupling nut, 5-pin 8.0000.5116.0000 Further accessories can be found in the accessories section or in the accessories area of our website at: www.kuebler.com/accessories Additional connectors can be found in the connection technology section or in the connection technology area of our website at: www.kuebler.com/connection technology Direction of inclination Adjusting the measuring range via 05.TX40.1 teach adapter Setting the angular range in CW direction: - Move sensor to start position - Press and hold Teach-GND until the output is set to < 4 mA / 0.1 V (approx. 1 s) - Move sensor to end position - Press and hold Teach-GND until the output is set to 20 mA / 4.9 V (approx. 3 s) Resetting the angular range: - Press and hold Teach-GND until the output is set to 12 mA (approx. 6 s) - The angular range is reset to 360 554 www.kuebler.com Fritz Kbler GmbH, subject to errors and changes. 07/2016Inclinometers Inclinometer MEMS / capacitive IS40, 1-dimensional Analog Technical data Mechanical characteristics Electrical characteristics Connection M12 connector Power supply 10 ... 30 V DC Weight 50 g 1.76 oz Power consumption 50 ... 105 mA (depending on voltage) Protection acc. to EN 60529 IP68 / IP69k Reverse polarity protection yes Working temperature range -30C ... +70C -22F ... +158F Measuring axes 1 Material plastic PBT-GF20-V0 Measuring range 0 ... 360 2 Shock resistance 300 m/s , 11 ms Resolution 0.14 2 Vibration resistance 100 m/s , 10 ... 2000 Hz Repeat accuracy 0.2 % of measuring range 0.1 % after a warm-up period Dimensions 60 x 30 x 20 mm 2.36 x 1.18 x 0.79 of 30 min Temperature drift 0.03/K Interface characteristics Reaction time 0.1 s Time that the output signal Voltage output 0.1 ... 4.9 V DC requires to reach 90 % full scale short-circuit protected to +V CE compliant acc. to EMC guideline 2014/30/EU Load resistance voltage output 40 k RoHS guideline 2011/65/EU Output impedance voltage output 99 ... 105 Current output 4 ... 20 mA Load resistance current output 200 Connections Terminal assignment Uz cw Uz ccw * 1 2 3 4 5 6 7 8 *) Teach adapter, accessory (Order no. 05.TX40.1) 1 2 3 4 5 6 7 8 A A 60 2 , 36 2 2, 7 0, 8 9 A A Dimensions 60 2 , 36 22 , 7 0, 8 9 Dimensions in mm inch B B B B C C 4, 5 0, 1 8 C C 4, 5 0 , 18 D D D D 10 0, 39 E E 50 1, 97 10 0, 39 E E This document is property of Fritz Kbler GmbH, use Material: General 50 1, 97 of this document without written permission is Scale: Werkstoff: prohibited. tolerances Mastab: Das Urheberrecht an dieser Zeichnung verbleibt uns. Allgemeintol. Type: Sie darf ohne unsere vorherige Zustimmung weder = Check item IS40 2:1 Typ: Prfma vervielfltigt noch Dritten zugnglich gemacht oder DIN ISO auf andere Weise mibraucht werden. Zuwieder- Size: Title:/Benennung: A3 handlungen verpflichten zu Schadenersatz. 2768-m-H Format: Surface: F Oberflche: -0,2 8.IS40.2XXX1 +0,2 Date Name This document is property of Fritz Kbler GmbH, use Material: Drawn Gbyeneral Scale: of t h is docum e nt without writt e n permission is 28.08.08 tw Bearb. Werkstoff: prohibited. tolerances Neigungssensor/Inclinometer Approv. by Mastab: Das Urheberrecht an dieser Zeichnung verbleibt uns. 2 2588 21.01.16 al Gepr. Type: Allgemeintol. Sie darf ohne unsere vorherige Zustimmung weder = CRhae 1,ck6 item 2:1 Typ: IS40 vervielfltigt noch Dritten zugnglich gemacht oder Drawingnumber:/Zeichnungsnummer: Sheet/ Prfma 1 2480 19.08.13 al DINF ISritzO Kbler GmbH auf andere Weise mibraucht werden. Zuwieder- Size: Title:/Benennung: Blatt 2768-m-H A3 ha0ndlungen v e rpflichten zu Sc28.had08.ener08satz. tw Zhl- und SeFonrmsoartte: chnik 1 / 1 Surface: F Rev . S t. Oberflche: 78054 VS-Schwenningen Z1345 Rev. No./nd. Nr. Date Name 1 2 3 4 -0,2 Revision 8.IS40.2XXX1 +0,2 Date Name Drawn by 28.08.08 tw Bearb. Neigungssensor/Inclinometer Approv. by 2 2588 21.01.16 al Gepr. Ra 1,6 1 2480 19.08.13 al Fritz Kbler GmbH Drawingnumber:/Zeichnungsnummer: Sheet/ Blatt 0 28.08.08 tw Zhl- und Sensortechnik 1 / 1 Fritz Kbler GmbH, subject to errors and changes. 07/2016 www.kuebler.com 555 Rev. St. 78054 VS-Schwenningen Z1345 1 2 3 4 Rev. No./nd. Nr. Date Name Revision R 4 , 5 0 , 18 R 4 , 5 0 , 18 M 1 2 x 1 M 1 2 x 1 10 0, 3 9 10 0, 39 20 0, 79 20 0, 79 20 0 , 79 20 0 , 79 3 0 1, 18 30 1, 18 8, 6 0, 34 8, 6 0, 34 8 0, 31 8 0, 31 Inclinometers