069175701701000 Kyocera AVX

Standard 26-28 AWG: WTB INTERINTER CONNECTCONNECT 00-9175 The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from 14 AWG to 28 AWG. This industry proven contact system has been tested to automotive levels of shock, vibration, and temperature cycling to prove their reliability and robustness. The simplicity of inserting a wire into the connector with a small tool allows a wide range of devices to be connected to the PCB without soldering. In SSL applications specifically, these connectors are used to bring power and signal onto the PCB or are used to daisy chain multiple boards together in a long string. While the IDC contact provides a gas-tight connection to conductor of the wire, the housing has been designed to grab the insulation of the wire to provide a positive strain relief even in the harshest conditions. In case of repair, the wires can be removed and replace up to three times. The 9175 series accepts 26 AWG to 28 AWG wires with an insulation diameter ranging from 0.7mm to 1.0mm. These single contact connectors support a 1 amp current rating and have a split SMT tail design to provide maximum stability on the PCB. Available in a 2p and 3p configuration, these connectors can be end stackable for higher pin counts. APPLICATIONS FEATURES AND BENEFITS Connecting discrete wire components IDC contact provides a gas-tight connection to the PCB for long term reliability directly to the PCB Connector housing captures the wire insulation for positive strain relief Bringing power and signals onto a PCB Tested to automotive levels on shock, vibration and temperature cycling for reliability Daisy chaining PCBs together to create Low and high volume assembly tools to match production volumes a continuous string of boards Reduced total applied cost versus solder or crimp processes Application Notes: refer to 201-01-124 High temperature insulator capable to 260 degrees C reflow soldering processes ELECTRICAL ENVIRONMENTAL MECHANICAL Current Rating: 1 Amp / Contact Operating Temperature: Insulator Material: Nylon 46: UL94V0 Voltage Rating: 150 VAC -40C to +125C Contact Material: Phosphor Bronze Plating: Tin over Nickel Durability: 3 Cycles HOW TO ORDER 00X 001 X 06 00 9175 Insulator Color Number of Ways Wire Gauge Size Plating Prefix Series 9 = UL White Option No of Code Accepted Wire 8 = UL Black Code Details 06 = Pure Tin Ways Wire Gauge Insulation Special Order all over 002 2 Page 2 001 28 Gauge Solid or Stranded Min 0.70 26 Gauge Solid or Stranded Max 1.00 003 3 Page 3 CONNECTOR/TOOLING PART NUMBER MATRIX SERIES 9175 IDC HAND INSERTION TOOLING* ACCESSORY CAPS Wire Plastic Metal Mass AWG Positions Color Part Number Though Wire Wire Stop Insulation (medium volume) (high volume) Termination 26 0.7 - 1.0 2p White 009175002001906 069175701601000 069175701701000 069175701701002 609175002010100 609175002010199 26 0.7 - 1.0 2p Black 009175002001806 069175701601000 069175701701000 069175701701002 609175002010000 609175002010099 26 0.7 - 1.0 3p White 009175003001906 069175701601000 069175701701000 069175701701003 609175003010100 609175003010199 26 0.7 - 1.0 3p Black 009175003001806 069175701601000 069175701701000 069175701701003 609175003010000 609175003010099 28 0.7 - 1.0 2p White 009175002001906 069175701601000 069175701701000 069175701701002 609175002010100 609175002010199 28 0.7 - 1.0 2p Black 009175002001806 069175701601000 069175701701000 069175701701002 609175002010000 609175002010099 28 0.7 - 1.0 3p White 009175003001906 069175701601000 069175701701000 069175701701003 609175003010100 609175003010199 28 0.7 - 1.0 3p Black 009175003001806 069175701601000 069175701701000 069175701701003 609175003010000 609175003010099 * Hand Insertion Tooling - Universal Hand Tool 067000773001000 Consult Application Notes 201-01-124 Certification: UL File E90723 1Standard 26-28 AWG: WTB INTERINTER CONNECTCONNECT 00-9175 26-28 AWG 2 WAY IDC CONNECTOR NOTES: 1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION. 2. CONTACT MATERIAL: PHOSPHOR BRONZE. INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46. COLOR REFER TO PAGE 1. 3. CONNECTOR DESIGNED TO ACCEPT 26 AND 28 GAUGE SOLID OR STRANDED WIRE. 4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED. 5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-100. SMT PCB LAYOUT PURE TIN PADS PACKING DETAILS REEL QTY 2000 LEADER 500MM TRAILER 500MM REEL / BOX 7 PACK QTY 14000 2