SMPS Capacitors RH Style - Surface Mount J Lead Range The RH range uses high volumetric efficient X7R capacitors in a J style lead frame. The range of components are uncoated and are suitable for input or output filter capacitors in high frequency DC-DC convertor, automotive, telecom, industrial and military applications. When large ceramic capacitors are used in applications they can easily be affected by stresses caused by temperature variations, thermal shock, mechanical vibrations and PCB bend movement. The RH range is designed with a J type lead frame which greatly reduces all of these thermo mechanical stresses experienced by large capacitors. The RH range allows the capacitors to be doubled stacked so a higher volumetric efficiency can be achieved by the customer and this saves PCB space. FEATURES RH 21/22 are AEC-Q200 compliant. RH range has low ESR/ESL capability PCB space saving using double stacked MLCCs Enhanced thermo mechanical stress resistance Note: AVX does not recommend or advise the use of adhesives to secure the RH components to the PCB. ELECTRICAL SPECIFICATIONS Typical ESR (m) 3 F, 100V X7R ESR 100KHz 17 Temperature Coefficient CECC 30 000, (4.24.1) ESR 500KHz 12 X7R: C Temperature Characteristic - 15%, -55C to +125C ESR 1MHz 14 Capacitance Test Measured at 1 VRMS max at 1KHz DIMENSIONS millimeters (inches) Dissipation Factor 25C S 0.1 No. of leads Style L max W max H max h (0.004) per side 2.5% max at 1KHz, 1 VRMS max 1.50 0.30 Insulation Resistance 25C RH21 7.20 (0.283) 5.40 (0.213) 4.60 (0.181) 2.50 (0.098) 2 (0.059 0.012) 100K megohms or 1000 megohms-F, whichever is less 1.50 0.30 RH22 7.20 (0.283) 5.40 (0.213) 7.50 (0.295) 2.50 (0.098) 2 (0.059 0.012) Dielectric Withstanding Voltage 25C (Flash Test) 1.78 0.25 250% rated voltage for 5 seconds with 50 mA max RH31 7.62 (0.300) 7.00 (0.270) 5.08 (0.200) 5.08 (0.200) 3 (0.070 0.010) charging current. (500 Volt units 150% rated voltage) 1.78 0.25 RH32 7.62 (0.300) 7.00 (0.270) 8.13 (0.320) 5.08 (0.200) 3 (0.070 0.010) Life Test (1000 hrs) CECC 30 000 (4.23) 1.60 0.10 200% rated voltage at +125C. RH41 9.20 (0.362) 8.70 (0.342) 4.90 (0.192) 5.08 (0.200) 3 (0.062 0.004) (500 Volt units 120% rated voltage) 1.60 0.10 RH42 9.20 (0.362) 8.70 (0.342) 8.20 (0.323) 5.08 (0.200) 3 (0.062 0.004) Thermal Shock IEC 68.2.14 1.60 0.10 -55C to +125C, 5 cycles RH51 10.7 (0.421) 10.7 (0.421) 4.90 (0.192) 7.62 (0.300) 4 (0.062 0.004) Resistance to Solder Heat IEC 68.2.20 1.60 0.10 RH52 10.7 (0.421) 10.7 (0.421) 8.20 (0.323) 7.62 (0.300) 4 (0.062 0.004) 1.60 0.10 RH61 14.9 (0.586) 13.6 (0.535) 4.90 (0.192) 10.2 (0.400) 5 (0.062 0.004) 1.60 0.10 DIMENSIONS: MILLIMETERS (INCHES) RH62 14.9 (0.586) 13.6 (0.535) 8.20 (0.323) 10.2 (0.400) 5 (0.062 0.004) Performance of SMPS capacitors can be simulated by downloading SpiCalci software program - SMPS Capacitors RH Style - Surface Mount J Lead Range X7R STABLE DIELECTRIC RH21/RH22 RH31/RH32 RH41/RH42 RH51/RH52 RH61/RH62 Style Style Style Style Style Voltage DC Cap F 25 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 0.047 0.056 0.068 RH31 0.082 0.1 0.12 0.15 RH32 RH41 0.18 0.22 0.27 RH31 0.33 RH42 RH51 0.39 RH41 0.47 0.56 RH32 RH52 0.68 RH61 0.78 RH51 0.82 RH31 RH42 1 1.2 RH62 1.5 RH31 RH41 RH52 RH61 1.8 2.2 RH32 RH41 3 3.3 RH21 RH32 RH42 RH62 3.9 RH51 4.7 RH42 5.6 RH52 6.8 RH51 RH61 8.2 RH21 RH61 10 RH52 RH51 12 RH22 RH62 15 RH21 RH22 RH51 RH62 18 RH52 22 RH52 33 RH22 DEV DEV DEV 47 DEV 68 DEV BME BME PME PME BME Development PACKAGING BME Available in RoHS and Non-RoHS PME For availability of further parts in the RH21/RH22 Series, contact manufacturing. Available Only in Non-RoHS Style Qty/Reel 13 Max. Qty/Waffle Pack 800 270 RH21 RH22 500 270 RH31 800 108 500 108 RH32 RH41 see note 108 500 100 RH42 Please contact RH51 750 88 plant for details RH52 see note 88 500 42 RH61 RH62 see note 42 Note: T&R is not yet available. Contact manufacturing for further information as this will be available in the future. HOW TO ORDER 0 A 3 RH 31 5 C 225 M A 3 Lead Space Lead Style Code Code Style Size Voltage Dielectric Capacitance Capacitance Specification Package Lead Dia. A = Standard 3 = J Lead Code Code Code Code Code Tolerance Code Code Code A = Non- 3 = Waffle Pack (see table 3 = 25V (2 significant K = 10% 0 = Standard C = X7R customized A = Tape & Reel 5 = 50V digits + no. of M = 20% R = RoHS Compliant above) 1 = 100V zeros) 2 = 200V eg. 105 = 1 uF 7 = 500V 104= 0.1 uF The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 65 072221