RF/Microwave Capacitors RF/Microwave Multilayer Capacitors (MLC) SQ Series Ultra Low ESR MLC FEATURES Low ESR High Q High Self Resonance Capacitance Range 0.1 pF to 5100pF 175C Capability SQCB (Standard voltages only) APPLICATIONS RF Power Amplifiers Low Noise Amplifiers Filter Networks MRI Systems HOW TO ORDER SQ CA M 100 J A T 1A 7 AVX Style Case Size Voltage Temperature Capacitance Capacitance Failure Rate Termination Style Packaging Code CA = 0605 EIA Capacitance Code in pF. ME = 7 Reel Marked (0605, Code Coefficient Code Tolerance Code Code Code CB = 1210 First two digits = significant 1210 & 0709 only) 5 = 50V M = +9020ppm/C A = .05 pF A = Not Applicable J=Nickel Barrier figures or R for decimal place. 2A = 7 Unmarked (0402, 1 = 100V A = 030ppm/C B = .1 pF Sn/Pb (60/40) Third digit = number of zeros or 0603, & 0805 only) E = 150V C = 15% (J Termination only) C = .25 pF **T=100% Tin after R significant figures. * Vertical T&R available 2 = 200V D = .5 pF **C=Non-Magnetic V = 250V F = 1% Barrier/Tin 9 = 300V G = 2% 7 = 500V J = 5% **RoHS compliant C = 600V K = 10% A = 1000V M = 20% S = 1500V MECHANICAL DIMENSIONS: inches (millimeters) L W Case Length (L) Width (W) Thickness (T) Band Width (bw) T .055 + .015 - .010 .055.015 .020/.057 .010 + .010 -.005 SQCA* (1.40+ .381 - .254) (1.40.381) (.508/1.45) (.254 +.254 -.127) .110 + .020 - .010 .110.010 .030/.102 .015.010 SQCB* (2.79 +.508 -.254) (2.79.254) (.762/2.59) (.381.254) bw TAPE & REEL: All tape and reel specifications are in compliance with EIA RS481 (equiv alent to IEC 286 part 3). 8mm carrier 7 reel: WAFFLE PACK SQCA 100 pcs SQCB 100 pcs LEAD-FREE COMPATIBLE COMPONENT For RoHS compliant products, please select correct termination style. Also available in: Not RoHS Compliant The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 429 A 101JRF/Microwave Capacitors RF/Microwave Multilayer Capacitors (MLC) SQ Series Ultra Low ESR MLC ELECTRICAL SPECIFICATIONS Dielectric M & A C (M) +90 20 PPM/C ( -55C to +125C) (M) +90 30 PPM/C ( +125C to +175C)* 15% (-55C to 125C) Temperature Coefficient (TCC) (A) 0 30 PPM/C (M) 0.1 pF to 1000 pF Capacitance Range 0.001F to 0.1F (A) 0.1 pF to 5100 pF A Case: -55C to +125C* B Case (M Dielectric): 0.1 pF to 330 pF: from -55C to +175C 360 pF to 5100 pF: from -55C to +125C -55C to +125C Operating Temperature B Case (A Dielectric): 0.1 pF to 200 pF: from -55C to +175C 220 pF to 5100 pF: from -55C to +125C M Dielectric A & B Case Greater than 10,000 at 1 MHz 2.5% 1kHz Greater than 10,000 at 1 MHz 0.1 - 200 pF A Dielectric B Case Greater than 2,000 at 1 MHz 220 - 1000 pF Quality Factor (Q) Greater than 2,000 at 1 KHz 1100 - 5100 pF Greater than 10,000 at 1 MHz 0.1 - 100 pF A Dielectric A Case Greater than 2,000 at 1 MHz 110 - 1000 pF 0.1 pF to 1000 pF 4 10 Megohms min. 25C at rated WVDC Insulation Resistance (IR) 105 Megohms min. 25C at rated WVDC 3 10 Megohms min. 125C at rated WVDC 104 Megohms min. 125C at rated WVDC Working Voltage (WVDC) See Capacitance Values table See Capacitance Values table Dielectric Withstanding Voltage (DWV) 250% of rated WVDC for 5 secs 250% of rated WVDC for 5 secs Aging Effects None <3% per decade hour Piezoelectric Effects None None (0.02% or 0.02 pF), whichever is greater Not Applicable Capacitance Drift Piezoelectric Effects None Capacitance Drift (0.02% or 0.02 pF), whichever is greater ENVIRONMENTAL CHARACTERISTICS AVX SQ will meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123 Thermal Shock Mil-STD-202, Method 107, Condition A Moisture Resistance Mil-STD-202, Method 106 Mil-STD-202, Method 103, condition A, with 1.5 VDC applied while subjected Low Voltage Humidity to an environment of 85C with 85% relative humidity for 240 hours Mil-STD-202, Method 108, for 2000 hours at 125C 200% WVDC Life Test Shock Mil-STD-202, Method 213, Condition J Mil-STD-202, Method 204, Condition B Vibration Immersion Mil-STD-202, Method 104, Condition B Salt Spray Mil-STD-202, Method 101, Condition B Mil-STD-202, Method 208 Solderability Terminal Strength Mil-STD-202, Method 211 Temperature Cycling Mil-STD-202, Method 102, Condition C Mil-STD-202, Method 105, Condition B Barometric Pressure Resistance to Solder Heat Mil-STD-202, Method 210, Condition C The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 430