FLEXIBLE CLAMP METER KEW 2204R/2210R The ideal solutions for current measurements in hard-to-clamp and crowded spaces 70mm 150 mm KEW 2204R Flexible and light weight clamp sensor MIN/MAX function Backlight LCD display IEC61010-1 (CAT 600V / CAT 1000V) KEW 2210R KEW 2204R/2210R Specications KEW2204R KEW2210R AC A (RMS) Range 4.000/40.00/400.0A 30.00/300.0/3000A 3%rdg 5dgt 45-500Hz Accuracy (At the center of the circle formed by the exible sensor) Crest factor Full scale CF<1.6, half scale<3.2 (CF) Effective input crest values are 2 times of the max values of each range. Conductor size 70mm max. 150mm max. Inuence of Additional 2%(max.)depending on Additional 3%(max.)depending on Conductor position the distance from the center position the distance from the center position Overload protection 500A AC for 10 seconds 5000A AC for 10 seconds IEC 61010-1, IEC 61010-2-032 Applicable standards CAT 600V / CAT 1000V Pollution degree 2 IEC 61326-1(EMC) , IEC 60529 IP40 , EN50581(RoHS) Operating temperature 0 - +50 ,less than 80% RH (without condensation) & humidity Storage temperature -10 - +60 ,less than 70% RH (without condensation) & humidity R03 / LR03(AAA)(1.5V) 2 Easy to use in crowded cable areas Power source Continuous measuring time approx.120hours (Auto power off approx.15 minutes) 120(L) 70(W) 26(D) Display unit 120(L) 70(W) 26(D) Display unit Dimensions 5.5mm approx. Cable diameter 8.5mm approx. Cable diameter 1.8m approx. Cable length 1.8m approx. Cable length Weight 200g approx. (including batteries) 300g approx. (including batteries) 9174 (Carrying case) Included Accessories LR03(AAA) 2, Insruction manual Operating Instructions Easy to clamp a wire in To open this flex sensor,disconnect the joint by pulling to the right. hard-to-reach narrow spaces Conrfi m that the joint connector on the flex sensor is firmly. Clamp onto one conductor only to the illustration above. Included Accessories 2204R 2210R Easy to read backlight LCD display Please read theSafety Warning in the instruction manual supplied with the instrument thoroughly and completely for correct use. Failure to follow the safety rules can cause re, trouble, electrical shock, etc. Therefore, make sure Safety Warnings : to operate the instrument on a correct power supply and voltage rating marked on each instrument. For inquires or orders : 2-5-20, Nakane, Meguro-ku, Tokyo, 152-0031 Japan Phone:+81-3-3723-0131 Fax:+81-3-3723-0152 E-mail:info-eng kew-ltd.co.jp The contents of this leaet are subject to change without notice. KEW 2204R/2210R-1E May. 16 AD