Eccosorb FGM Thin, Flexible, Broadband Microwave Absorber THIN FLEXIBLE BROADBAND ABSORBER Eccosorb FGM is a thin, flexible, magnetically loaded, silicone absorber. Silicone absorbers have high service temperature capabilities and offer advantages for high power and low out- gassing applications. They can be subjected to high altitudes, including space, with no adverse effects. FEATURES AND BENEFITS MARKETS High power performance Commercial Telecom High magnetic loss Security and Defense Low outgassing properties SPECIFICATIONS TYPICAL PROPERTIES ECCOSORB FGM-40 ECCOSORB FGM-125 Frequency Range (GHz) 4 - 18 2 - 12 Max Service Temperature C (F) 170 (338) 170 (338) Hardness (Shore A) 94 85 Weight kg/m (lb/ft) 5.0 (1.0) 10.8 (2.2) Outgassing (%TML) (%CVCM)* 0.16/0.06 0.31/0.10 Data for design engineer guidance only. Observed performance varies in application. Engineers are reminded to test the material in application. * Outgassing data per ASTM E595-07 criteria for acceptability is 1.00% TML and 0.10% CVCM. APPLICATIONS Eccosorb FGM is used to line cavities in which antennas operate. It may be applied to surfaces to improve radar performance, reduce radar cross section or backscattering. Eccosorb FGM is effective even at high power in reducing specular reflections as well as surface currents due to the high magnetic loss properties. When bonded to a metal surface Eccosorb FGM will significantly reduce the reflectivity of metal objects or structures due to the flow of microwave currents on that surface. It can be applied to antenna elements, microwave dishes, the inner or outer surfaces of waveguides for isolation, attenuation or modification of radiating patterns. Applications include power amplifiers, oscillators, down/up converters and LNBs. It is also utilized to modify antenna patterns, cover antenna feed supports, line antenna caps to reduce reflections and improve the isolation of sensitive RF devices. AVAILABILITY Standard sheets are 305 x 305mm (12x12). Standard thicknesses are 1.0mm (.040) and 3.2mm (.125). On request Eccosorb FGM can be supplied with a Pressure Sensitive Adhesive. The product is also available in other sizes, thicknesses and customer specified configurations upon request. Americas: +1.866.928.8181 Europe: +49.(0)8031.2460.0 Asia: +86.755.2714.1166 www.lairdtech.com Eccosorb FGM INSTRUCTIONS FOR USE To obtain low reflectivity, the absorber must be mounted on a metal surface. The material can be bonded by use of an RTV silicone based adhesive in conjunction with a suitable primer. To obtain a strong bond, the metallic surface should be thoroughly cleaned with a degreasing solvent. Eccosorb FGM can be readily cut with a sharp knife and template. It is a very flexible material and conforms to contoured surfaces. Typical Reflectivity 0 -5 -10 -15 -20 2 4 6 8 10 12 14 16 18 Frequency (GHz) FGM-40 FGM-125 RFP-DS-FGM 092515 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or 2 consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights. Reflectivity (dB)