TM Tputty 504 Series Innovative Technology for a Connected World SofT , Silicone Gel Tputty 504 is a soft silicone gel thermal gap filler ideal for applications where large gap tolerances are present. The silicone gel is filled with a complex matrix of ceramic fillers to yield superior thermal performance. Tputty 504 is soft and compliant transferring little to no pressure between interfaces. Because Tputty 504 has a higher viscosity than grease, it eliminates the bleed and pump-out usually associated with grease. Bond line variances can also be more easily controlled than with traditional thermal pads. Tputty 504 can be applied like grease and is easily dispensable from a wide range of commercially available equipment including screen print, syringe and automated equipment. feATUReS AnD BenefiTS APPlicATionS Flip chip microprocessors Soft and compliant transferring little to no PPGAs, micro BGAs, BGAs pressure between interfaces DSP chips, graphic accelerator chips 1.8 W/mK thermal conductivity Other high-wattage electronic components Available in 10cc, 30cc and 55cc syringes LED lighting Available in 100cc,170cc and 305cc auto dispense cartridges Available in bulk containers from sample jars through 20 kg pails Applies like grease and is easily dispensable from a wide range of commercially available equipment including screen print, syringe and automated equipment global solutions: local support TM Americas: +1.800.843.4556 Europe: +49.8031.2460.0 Asia: +86.755.2714.1166 CLV-customerservice lairdtech.com www.lairdtech.com/thermalTM Tputty 504 Series Innovative Technology for a Connected World TM Tputty 504 TEST METHOD Ceramic-filled Construction & Composition dispensable silicone gel Color Light Grey Visual Viscocity 23C, mPa.s (cP) Brookfield 4,000,000 to RV, TC spindle, 8,000,000 Helipath 0.5 rpm Temperature Range -45C to 200C Thermal Conductivity 1.8 W/mK ASTM D5470 Density 2.7 g/cc Thermal Impendance 0.15C-in/W ASTM D5470 Final Thickness 0.010 (0.97C-cm/W) (modified) Thermal Impendance 0.27C-in/W ASTM D5470 Final Thickness 0.020 (1.74C-cm/W) (modified) Dielectric Strength 500 VAC/mil ASTM D149 14 Volume Resistivity >10 ohm-cm ASTM D2240 MSDS Available upon request Outgassing TML, wt% / vol% 0.34 / 0.92 ASTM E595 Outgassing CVCM, wt% / vol% 0.09 / 0.24 ASTM E595 Data for design engineer guidance only. Observed performance varies in application. Engineers are reminded to test the material in application. THR-DS-Tputty-504 1111 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and ap- plication of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2011 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights . A13850-00 Rev I, 11/2011