TM Tflex CR200 Series Gap Filler Material TWO-PART CURE IN PLACE GAP FILLER Tflex CR200 is a two-part, silicone-based thermal gap filler that has low viscosity prior to curing. Tflex CR200 is ideal for applications where large gap tolerances are present. The low viscosity makes it ideal for applications in which the components cannot withstand high pressure during assembly. The mixed material will cure at room temperature or can be accelerated with the addition of heat. The Tflex CR200 composition provides excellent thermal performance and compliance. FEATURES AND BENEFITS APPLICATIONS Soft and compliant transferring little to Automotive electronics no pressure between interfaces LED Lighting 2.0 W/mK thermal conductivity Graphic chips Available in 50cc & 200cc cartridges, and Telecom Base Stations 20 kg pail kits Microprocessors Easy to dispense SPECIFICATIONS TM Tflex CR200 METHOD Composition Two-part, ceramic filled dispensable liquid silicone gap filler Color/Part A Yellow Visual Color/Part B White Visual Viscosity before combining (cps) 260,000 ASTM D2196 Density (g/cc) 2.47 Helium Pycnometer Mix ratio 1.1 PROPERTIES AFTER CURING Thermal Conductivity (W/mK) 2.0 Hot Disk Hardness (Shore 00): 3 seconds 45 ASTM D2240 13 Volume Resistivity (Ohm-cm) 10 ASTM D991 Continuous Use Temperature (C) -45 to 200 Minimum Bondline Thickness 25.4 (microns) Glass Transition Temperture, Tg (C) < -60 ASTM E1356 Flammability VO UL 94 CURING PROFILE Pot life 25C (minutes) 60 Cure 25C (minutes) 300 Cure 100C (minutes) 2 OPTIONS Available in 50 cc & 200 cc cartridges, and 20 kg pail kits Available with or without beads (8 mils and 10 mils beads) Americas: +1.800.843.4556 Europe: +49.8031.2460.0 Asia: +86.755.2741.1166 THR-DS-Tflex CR200 040617 Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any specific or general uses. Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be CLV-customerservice lairdtech.com liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Technologies Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third www.lairdtech.com/thermal parties. Nothing herein provides a license under any Laird or any third party intellectual property rights. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Thermal Interface Products category: Click to view products by Laird Connectivity manufacturer: Other Similar products are found below : 7721-9PPS FGN80-2 PFM-172-60 A-40 174-9-230P 9601-7 5300AC 1.500G 08133 V6622C TVQF-1225-07S TP0001 4860 SC80-W2 V6516C A17536-04 A17713-06 A17713-05 A17653-05 A17690-06 A17689-04 A17775-03 A17690-05 A17653-02 A17689-02 A17690- 04 A17775-05 A17775-06 A17690-08 A17690-02 A17689-06 A17653-06 A17690-12 A17653-03 A17536-02 A17689-03 A17536-10 A17752-13 A17752-04 A17752-07 A17634-12 19-36565-0001-1 A17752-09 22000-001A A17752-20 A17752-16 A17752-12 A17653-04 A17634-10 A17634-09 A17634-07