A17536-04 Laird Connectivity

TM Tflex HD700 Series Thermal Gap Filler PRODUCT DESCRIPTION Tflex HD700 combines 5 W/mK thermal conductivity with superior pressure versus deflection characteristics. The combination will allow minimal stress on components while also yielding low thermal resistance. As a result, less mechanical and thermal stresses will be experienced within your device. Tflex HD700 is available in thickness from 0.5mm (0.020) to 5mm (0.200). Laird can provide material to meet your production needs in any region through our local production facilities. Please contact your local Laird sales or field engineering contact for samples or questions. FEATURES AND BENEFITS 5.0 W/mK thermal conductivity Low pressure versus deflection Excellent surface wetting for low contact resistance Minimizes board and component stress Large tolerance applications Environmentally friendly solution that meets regulatory requirements including RoHS and REACH SPECIFICATIONS TYPICAL PROPERTIES VALUE TEST METHOD Construction & Composition Ceramic filled silicone sheet N/A Color Pink (*Option for Grey) Visual Thickness Range 0.50mm (0.020) 5.0mm (0.20) N/A Thickness Tolerance +/- 10% N/A Thermal Conductivity (W/mK) 5.0 ASTM D5470 Density (g/cc) 3.3 Helium Pycnometer Hardness (Shore 00) 54 ASTM D2240 Outgassing TML (weight %) 0.23 ASTM E595 Outgassing CVCM (weight %) 0.07 ASTM E595 Temperature Range -50C to 200C Laird Test Method Rth 40 mils, 10 psi 0.287Cin2/W ASTM D5470 (Modified) Dielectric Constant 1 MHz 5.01 ASTM D150 UL Flammability Rating V-0 UL 94 14 Volume Resistivity 1.4x 10 ohm-cm ASTM D257 Americas: +1.866.928.8181 Europe: +49.(0).8031.2460.0 Asia: +86.755.2714.1166 www.lairdtech.comTM Tflex HD700 Series Thermal Gap Filler Tflex HD700 Thermal Resistance vs Pressure 1.400 C-in2/W 1.200 C-in2/W 1.000 C-in2/W 0.800 C-in2/W 0.600 C-in2/W 0.400 C-in2/W 0.200 C-in2/W 0.000 C-in2/W 10 psi 20 psi 30 psi 40 psi 50 psi 60 psi 70 psi 80 psi 90 psi 100 psi Tflex HD720 Tflex HD740 Tflex HD780 Tflex HD7100 Tflex HD7140 Tflex HD7200 Tflex HD700 Deflection vs Pressure 80% 70% 60% 50% 40% 30% 20% 10% 0% 0 psi 20 psi 40 psi 60 psi 80 psi 100 psi Tflex HD720 Tflex HD740 Tflex HD780 Tflex HD7100 Tflex HD7140 Tflex HD7200 AVAILABILITY STANDARD THICKNESSES 0.5mm (0.020) to 5.0mm (0.200) thick material available in 0.25mm (0.010) increments Available in standard sheet sizes of 18 x 18 and 9 x 9 or custom die cut parts OPTIONS DC1 eliminate tack from one side Grey Color Tflex HD700,GR PART NUMBER SYSTEM Tflex indicates Laird elastomeric thermal gap filler product line. HD7xxx indicates Tflex HD700 product line with thickness in mils (0.001) EXAMPLES: Tflex HD740 = 0.040 thick Tflex HD700 material Tflex HD7100,DC1 = 0.10 thick Tflex HD700 material with DC1 option Tflex HD7120,GR = 0.120 thick Tflex HD700 material in grey color A17758-00 Tflex HD700 DS 12-01-2021 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2013 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.