AC4490 900MHz Radio Module Innovative Technology for a Connected World THE FASTEST WAY TO WIRELESS Laird Technologies compact AC4490 900MHz radio modules replace miles of cable in harsh industrial environments. Using field-proven FHSS technology that needs no additional site licensing*, AC4490s reject interference, enable co-located system operation, provide a full range of output power, and maintain data integrity. The AC4490 features include drop-in installation and a number of on-the-fly control commands, providing OEMs with a versatile interface for any application. They can be used as direct cable replacements, requiring no special host software for communication. All frequency hopping, synchronization, and RF system data transmission/reception is performed by the module. This radio module can achieve open field ranges in excess of 20 miles, has high propogation in the 900 MHz band, and includes options for 1W power transmission and a sensitive low noise amplifier in the receive chain. AC4490 modules are socket-compatible with Laird Technologies 2.4GHz AC4424 modules, enabling OEMs to design once and subsequently interchange radios to accommodate new markets, regulations, and environments. Developer tools and comprehensive technical support are available to aid integration. Contact Laird Technologies to help you find the best fit for your application. FEATURES MARKETS Lowest cost one-watt module available Recreation Long range mode enables 20 miles Utility Management High 900MHz data rate: 32 kbps Commercial Buildings Small form factor: 1.65 x 1.9 inches Fleet Telemetry Operates in 40C to +80C temp range Field Surveillance Variable output power: 10mW to 1000mW Simple Configuration global solutions: local support TM USA: +1.800.492.2320 Europe: +44.1628.858.940 Asia: +852.2268.6567 wirelessinfo lairdtech.com www.lairdtech.com/wirelessAC4490 900MHz Radio Module Innovative Technology for a Connected World FLEXIBLE RF PROTOCOL Laird Technologies embedded transparent protocol simplifies the OEMs integration process by utilizing drop-in installation. As each radio module receives raw data, it manages its over-the-air protocol to assure successful communication. Headers, data packet length, and CRCs are not required. The RF232 supports simple cable-replacement to complex peer-to-peer configurations, broadcast communication to all radio modules or address packets to a specific destination using unique MAC addresses embedded in each radio module. SPECIFICATIONS RF PROTOCOL MODES a) Communication Parameter AC4490(LR)1000 Unicast (one-to-one addressing) Interface 20-pin mini connector Broadcast (one-to-multiple addressing) Frequency (software selectable) 902-928 MHz (U.S)** b) Acknowledgement mode (ACK) Modulation FHSS FSK API with hardware and/or software ACK indication Serial interface options 3V TTL c) One-beacon mode Serial interface data rate Up to 115.2 Kbps d) Dynamic radio data table: Output power (w/ 3dBi antenna) 10mW-1000mW variable Retains data from up to Current consumption 650 mA typical 12 radio modules Channels Up to 32 (U.S.)** Security One-byte system ID, DES Voltage pin 10: 3.3V-5.5V INTERFACE PROTOCOL pin 11: 3.3V +/-3% a) On-the-fly radio module configuration: Sensitivity AC4490-1000: -100 dB Destination address AC4490LR-1000: -110 dB (Long Range mode) RF transmit power Range Up to 20 miles (32 km) Co-located servers Temperature -40 to +80C RF channel Broadcast/addressed Humidity (non-condensing) 10% to 90% b) Raw data or transmit/receive API Dimensions 1.90 x 1.65 x 0.20 (49 x 42 x 5 mm) c) 9-bit serial interface mode Weight < 0.75 oz (< 21 g) d) Long range mode, enables Antenna External dipole sensitivity control e) Generic A/D, D/A generic I/Os *The 900MHz frequency band is approved in the Americas and Australia as an unlicensed spectrum subject to approval by device. f) Variable baud rate **For products and specifications suited to non-U.S. countries (e.g. Australia and Europe), please contact Laird g) RF packet size, timeout control Technologies directly. h) Onboard temperature sensor Although AC4490 radios will not talk to AC4424 radios, socket-compatibility allows for interchanging the i) Handshaking, CTS/RTS, modules network-wide. full modem-mode available Current consumption assumes 50% transmitter on-time. j) In-range indicator k) Error detection Onboard CRC The details contained within the document are Duplicate packet filtering subject to change. Download the product specification from www.lairdtech.com/wireless for the most current l) Data encryption standard (DES) specification. LWS-SPEC-AC4490 0109 Any information furnished by Laird Technologies and its agents is believed to be accurate and reliable. Responsibility for the use and application of Laird Technologies materials rests with the end user since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchant - ability, or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies terms and conditions of sale in effect from time to time, a copy of which will be furnished upon request. For further information please visit our website at www.lairdtech.com. Alternatively contact: wirelessinfo lairdtech.com. Bluetooth is a trademark owned by Bluetooth SIG, Inc., USA and licensed to Laird Technologies. 2009 All Rights Reserved. Laird Technologies is a registered trademark of Laird Technologies, Inc..