TM OptoTEC Series ET19,23,F1N,0608 Thermoelectric Module TM The OptoTEC Se rie s is a miniature the rmoelectric module (TEM). This product series is primarily used in applications to stabilize the temperature of sensitive op tical compone nts in tele com and photonics industries. This product line is available in multiple configurations and surface finishing options. Assembled with Bismuth TM Telluride semiconductor material and thermally conductive Aluminum Oxide ceramics, the OptoTEC Series is designed for lower current and lower heat-pumping applications. Custom designs are available to accommodate metallization, pretinning , ceramic paerns,tt and solder posts, however MOQ applies. FEATURES APPLICATIONS Miniature geometric sizes Laser diodes Precise temperature control CCD cameras Reliable solid state operation Infrared (IR) sensors No sound or vibration Pump lasers DC operation Crystal oscillators RoHS compliant Optical transceivers PERFORMANCE SPECIFICATIONS Hot side temperature (C) 25 50 Qmax (watts) 3.0 3.3 Delta Tmax (C) 65 75 Imax (amps) 1.9 1.9 Vmax (volts) 2.7 3.0 Module resistance (ohms) 1.26 1.42 SUFFIX THICKNESS FLATNESS & HOT COLD LEAD (PRIOR TO TINNING) PARALLELISM FACE FACE LENGTH 11 0.065 +/- 0.002 0.002 / 0.002 Lapped Lapped 2.0 TB 0.065 +/- 0.0005 0.0005 / 0.0005 Lapped Lapped 2.0 00 0.064 +/- 0.005 NA / NA Metallized Metallized 2.0 22 0.064 +/- 0.005 NA / NA Pre-tinned Pre-tinned 2.0 GG 0.064 +/- 0.005 NA / NA Au Plated Au Plated 2.0 SEALING OPTION SUFFIX SEALANT COLOR TEMP RANGE DESCRIPTION RT RTV White -60 to 204 C Non-corrosive, silicone adhesive sealant EP Epoxy Black -55 to 150 C Low density syntactic foam epoxy encapsulant Americas: +1 888.246.9050 Europe: +46.31.704.67.57 Asia: +86.755.2714.1166 clv.customerpos lairdtech.com www.lairdtech.com TM OptoTEC Series ET19,23,F1N,0608 Thermoelectric Module PERFORMANCE CURVES 3.0 3.5 1.9 A 3.0 2.5 1.5 A 1.2 A 2.5 2.0 0.8 A 2.0 0.4 A 1.5 1.5 1.0 1.0 0.5 0.5 0.0 0.0 80 70 60 50 40 30 20 10 0 80 70 60 50 40 30 20 10 0 Delta T (C) Delta T (C) MECHANICAL DRAWING Ceramic Material Aluminum Nitride Ceramics Solder Construction: 232C SnSb OPERATING TIPS Max operating temperature: 80C Reference assembly guidelines for recommended installation Do not exceed Imax or Vmax when Solder tinning also available on operating module metallized ceramics THR-DS-ET19,23,F1N,0608,11,W2.25 110414 Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any specific or general uses. Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Technologies Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2014 Laird Technologies, Inc. All Rights Reser ved. Laird, Laird Technologies, the Laird Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or ser vice names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights. Voltage (V) Qc (W)