A Lairds fiberglass base station antennas are collinear designs enclosed in a high-density fiberglass, which is covered with a protective ultraviolet inhibiting coating. The radiating elements are made from high efficiency copper and are carefully phased to provide maximum gain in the horizontal plane. The mounting sleeves are tuned to eliminate RF currents from the transmission line, resulting in a cold sleeve allowing great freedom in mounting. This high quality and well-focused beam provides the highest gain and best efficiency. FEATURES AND BENEFITS Highly stable PC board matching network N-female industry standard connector Superior quality design 100% tested on a network analyzer Special UV treated radome Operating Frequency (MHz) 902-928 VSWR (max) 2.0:1 Peak Gain, max (dBi) 5 Nominal Impedance (Ohms) 50 Max Power - Ambient 25C (W) 200 Polarization Vertical Vertical Plane 3 dB Beamwidth 70 Horizontal Plane 3 dB Beamwidth 360 Termination N-female Connector Dimensions diameter x height cm (inches) 3.33 (1.31) x 58.74 (23 1/8) <0.454 (<1) Weight kg (lb) Lightning Arrestor LABH350NN (Sold Separately) Lightning Protection FM2 Mounting Kit (Sold separately) Mounting Information Rated Wind Velocity kph (mph) 210 (125) Rated Wind Velocity (with 0.5 radial ice) kph (mph) 137 (185) Lateral Thrust 125mph kg. (lbs) 26 (57) Wind Resistance sq. meter (sq. ft.) 0.0195 (0.2104) Americas: +1.847 839.6925 IAS-AmericasSales lairdtech.com Laird warrants to the original end user customer of its products that its products are free from defects in material and workmanship. Subject to conditions and limitations Laird will, at its option, Europe: +44.1628.858941 either repair or replace any part of its products that prove defective because of improper workmanship or materials. This limited warranty is in force for the useful lifetime of the original end IAS-EUSales lairdtech.com product into which the Laird product is installed. Useful lifetime of the original end product may vary but is not to exceed five (5) years from the original date of the end product purchase. Any information furnished by Laird Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Asia: IAS-AsiaSales lairdtech.com Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, Middle East and Africa: merchantability or suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. +44.1628.858941 Copyright 2018 Laird Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trademarks or registered trademarks of Laird Inc. or an affiliate company thereof. IAS-MEAUSales lairdtech.com Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights. www.lairdtech.com