Ferrite EMI Disks and Plates Laird Technologies, Ferrite Disks and Plates provide a simple, cost-effective solution for radiated and inductively-coupled electromagnetic interference. After the PC board soldering process, a ferrite disk or plate can be installed directly on the source of EMI (such as active devices or unwanted antennas). Features: 2 Easy installation Each part for volume production is provided with permanent, double sided 3,5 mil acrylic adhesive with 218 oz./inch adhesion. Samples and sample kits are available with removable and reusable adhesive fortrial and erro testing Variety of sizes offered For frequencies above 250 MHz, H series material is generally better than M series material Custom parts also available. Applications: Laird Technologies, ferrite disks and plates can be utilized either as inductively-coupled components or EMI shields on PC board components and traces. (Inductive coupling occurs when the ferrite affects the conducted wave form leaving the active component. The rise time of the wave form is effectively slowed by the ferrite, and the overshoot and associated ringing are attenuated. EMI shielding occurs when the ferrite absorbs the radiated emissions from active com- ponents, effectively protecting other boards or components in the vicinity from radiated contamination). Can be used to locate unwanted EMI antennas. Flat Flex & Ribbon cables. Can also provide retrofit, auxiliary EMI attenuation. A B C PAr T mm mm mm NUMBEr (inches) (inches) (inches) 20,00 1,27 HM0787-100 (0,787) (0,050) 20,00 1,91 HM0787-200 (0,787) (0,075) Disk Plate 35,56 1,91 HM1400-200 (1,400) (0,075) 35,56 2,54 HM1400-300 (1,400) (0,100) 16,51 1,27 MM0650-100 (0.650) (0,050) PAr T NUMBErING SYSTEM 20,00 1,27 MM0787-100 (0,787) (0,050) 0787 100 20,00 1,91 H M MM0787-200 (0,787) (0,075) 35,56 1,91 H - MATErIAL M - DISk PAr T SIZE THICkNESS MM1400-200 (1,400) (0,075) M - MATErIAL P - PLATE IDENTIFICATION CODE 35,56 2,54 MM1400-300 (1,400) (0,100) 26,42 26,42 1,27 EXAMPLE APPLICATION MP 1040-100 HP1040-100 (1,040) (1,040) (0,050) HP 1040-100 MP1040-100 and HP1040-100 26,42 26,42 1,91 1 HP1040-200 (1,040) (1,040) (0,075) 8,00 8,00 2,00 MP0315-200 (0,315) (0,315) (0,079) 0 26,42 8,89 1,27 MP0350-000 (1,040) (0,350) (0,050) - 1 11,00 11,00 1,96 MP0433-000 (0,433) (0,433) (0,077) HP 13,00 13,00 2,00 - 2 MP0512-200 (0,512) (0,512) (0,079) MP 21,00 15,00 2,00 MP0590-200 - 3 (0,827) (0,591) (0,079) 15,00 15,00 2,00 MP0591-200 (0,591) (0,591) (0,079) - 4 19,30 19,30 1,27 MP0760-100 (0,760) (0,760) (0,050) - 5 26,42 26,42 1,27 MP1040-100 (1,040) (1,040) (0,050) 26,42 26,42 1,91 - 6 MP1040-200 (1,040) (1,040) (0,075) 1 10 100 1000 26,42 26,42 2,25 MP1040-300 Frequency MHz (1,040) (1,040) (0,089) 38,00 38,00 2,00 MP1496-000 (1,496) (1,496) (0,079) Example Application Graph Explanation: The zero line on the graph represents the base line noise recorded for an unprotected microprocessor. The curves (dB down) represent the performance of the Laird Technologies ferrite plates relative to the baseline. The addition of the ferrite plates to the top of the processor in this specific application exhibits up to a 5 dB EMI reduction relative to the unprotected part. In the example application graph above, the ferrite plate MP1040-100 exhibits up to a 1 dB advantage over the HP1040-100 from 1-100 MHz, while the HP1040-100 exhibits a 0,5 dB advantage between 200 and 400 MHz. Performance can vary with different sizes, materials, processors and applications. Test Conditions: Microprocessor Motorola HC16 Clock Speed 16 MHz Mini-Tem radiated emissions using an sbec3a tem cell board Sweep Rate 100 s No. of Sweeps 1 Resolution BW 10 kHz Video BW 30 kHz Amplification 31,00 dB Ferrite disc & plate samples are available with temporary adhesive so the sample part can be tested in numerous locations. Production parts have permanent adhesive. Custom parts available. www.lairdtech.com SIP-BRO-DISKPLATE-0208 dB down (relative to baseline noise) ADHESIVE ADHESIVE