Multistage Series MS2,107,10,10,12,12 Thermoelectric Modules The MS Series of thermoelectric modules (TEMs) are designed to reach cool down temperatures that are not achievable with single stage TEMs. This product line is available in numerous heat pumping capacities, geometric shapes and temperature differentials. Assembled with Bismuth Telluride semiconductor material and thermally conductive Aluminum Oxide ceramics, the MS Series is designed for higher current and lower heat-pumping applications. FEATURES APPLICATIONS High temperature differential CCD cameras Precise temperature control Electron microscope Reliable solid state operation Calibration equipment Environmentally friendly Photonics laser systems DC operation Gas analyzers RoHS compliant infrared (IR) Sensors Guidance Systems PERFORMANCE SPECIFICATIONS Hot Side Temperature (C) 25 Qmax (Watts) 9.6 Delta Tmax (C) 87 Imax (Amps) 2.9 Vmax (Volts) 9.1 SUFFIX THICKNESS FLATNESS & HOT COLD LEAD (PRIOR TO TINNING) PARALLELISM FACE FACE LENGTH 00 0.2580.008 0.001 / 0.004 Metallized Metallized 7.87 11 0.246 0.008 0.001 / 0.002 Lapped Lapped 7.87 22 0.2580.008 0.001 / 0.004 Pre-tinned Pre-tinned 7.87 SEALING OPTION SUFFIX SEALANT COLOR TEMP RANGE DESCRIPTION RT RTV White -60 to 204 C Non-corrosive, silicone adhesive sealant EP Epoxy Black -55 to 150 C Low density syntactic foam epoxy encapsulant Americas: +1 888.246.9050 Europe: +46.31.420530 Asia: +86.755.2714.1166 Thermal-AmericasSales lairdtech.com www.lairdtech.com Multistage Series MS2,107,10,10,12,12 Thermoelectric Modules Performance Curves at Th = 25C THERMO ELECTRIC 10.0 4.50 9.0 1.0 A 4.00 8.0 1.5 A 3.50 7.0 2.0 A 3.00 2.5 A 6.0 2.9 A 5.0 2.50 4.0 2.00 3.0 1.50 2.0 1.00 1.0 0.0 0.50 100 90 80 70 60 50 40 30 20 10 0 0.00 100 90 80 70 60 50 40 Delta T (C) Delta T (C) +INPUT (RED) 24 AWG UL 1569 -INPUT (BLACK) 0.8900.008 22.6 0.2MM COLD FACE SEE TABLE HOT FACE SEE TABLE 96% and 100% Alumina Ceramics OPERATING TIPS Reference assembly guidelines for Max Operating Temperature: 80C recommended installation Do not exceed Imax or Vmax when operating module Solder tinning also available on metallized ceramics THR-DS-MS2,107,10,10,12,12 070215 Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any specific or general uses. Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Technologies Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights. 0.890 0.008 22.6 0.2MM Qc (W) THICKNESS SEE TABLE Voltage (V)