915 MHz Wireless Module LT1110 Innovative Technology for a Connected World THE FASTEST WAY TO WIRELESS Laird Technologies third generation 915 MHz FHSS module sets yet another standard for industrial RF communication. Based on proprietary FlexRF technology, this globally-accepted module will exceed most OEM application and performance requirements. Embedded with Laird Technologies robust server-client protocol, the LT1110 permits an unlimited number of clients to synchronize to a single server for low latency communications. The server and all clients in a network can communicate with any radio in range via either addressed or broadcast packets. The configuration and test software allows OEMs to design and test networks to suit their applications. From the OEM integrators point of view, the LT1110s interface (API, configuration, etc) is 100% compatible with the LT2510 allowing the OEM to choose either 915 MHz or 2.4 GHz. The enhanced API commands provide packet routing control and network intelligence. With its field-proven proprietary FHSS RF protocol and increased penetration at 915 MHz, the LT1110 rejects RF noise, excels in multipath scenarios, allows for co-located systems, and provides an extremely reliable communication link. The LT1110 achieves RF data rates up to three times faster than our previous generation 915 MHz transceivers. Two output power levels are available, a low power module with 8 dBm conducted output power and a high power with 23 dBm conducted output power. Line of sight communication up to mile and 2 miles respectively, is possible while consuming as little as 32 mA of current in full transmit mode It also comes with a modular approval allowing higher gain antennae to greatly increase the effective range. At the same time, a range of ultra-low power modes make the LT1110 your best solution for power-restrictive or battery-operated applications. The mini SMT package is well-suited for space-constrained designs and has the same pin-out and mechanical form factor as the 2.4 GHz LT2510 module. It is available in pick-and-place packaging for volume manufacturing. A pluggable version with two single row headers is offered for ease of integration. FEATURES MARKETS Very robust in the presence Commercial buildings of interference Field surveillance 915 MHz for improved Utility management RF penetration Recreation High throughput Fleet telemetry Ultra-low power consumption Long range capability Miniature SMT form factor Integrated battery monitor, temperature sensor, GPIOs and ADC Simple integration global solutions: local support TM USA: +1.800.492.2320 Europe: +44.1628.858.940 Asia: +852.2268.6567 wirelessinfo lairdtech.com www.lairdtech.com/wireless915 MHz Wireless Module LT1110 Innovative Technology for a Connected World FLEXIBLE RF PROTOCOL RF PROTOCOL MODES a) Communication Embedded into Laird Technologies 900MHz and 2.4 GHz FHSS modules, FlexRF technology Unicast (one-to-one addressing) supports unrivaled flexibility in industrial wireless applications. OEMs have the ability to control Broadcast (one-to-multiple addressing) and optimize both the radio module and the network, allowing them to develop a highly reliable system for their specific application. b) Fast sync time d) Random back-off Numerous software hooks empower, control, and provide flexibility. They allow designers to mold the communication link around applications, as opposed to squeezing the application e) Dynamic radio data table: Retains data from up to 32 radio modules into a fixed communication technology or standard. Each transceiver is designed to provide OEMs with a feature-rich, high-performance, configurable, secure, compatible, integrated f) Configurable retries solution, allowing OEMs to build the most optimized network possible. g) Auto channel Parameter PRM210/211/220/221 PRM230/231/240/241 Interface UART INTERFACE PROTOCOL Frequency 902-928 MHz a) On-the-fly radio module configuration: 230 kbps / 500 kbps, Full API control RF Data Rate 230 kbps depends on profile Destination address Serial Interface Options Logic level (matches supply voltage) RF transmit power Serial Interface Data Rate Up to 460,800 baud RF channel Variable Conducted -4 to +8 dBm (6.3 mW) +13 to +23 dBm (200 mW) Broadcast/addressed Output Power b) Raw data or transmit/receive API Maximum Radiated Power +23 dBm (200 mW) +29 dBm (800 mW) (E.I.R.P) with 13 dBd yagi with 6 dBi antenna c) Battery monitor Current Consumption d) A/D, PWM Output and Generic I/Os 47 mA 230 mA Peak Tx e) Variable baud rate 30 mA 30 mA f) Configurable RF packet size, Peak Rx timeout control 8 mA 8 mA Average Idle g) Onboard temperature sensor 0.3A 0.3A Sleep h) Handshaking, CTS/RTS Channels Depends on profile, up to 52 52 Channels i) In-range indicator 230 kbps RF rate: -89 dBm Sensitivity (BER 10 ) 230 kbps RF rate: -89 dBm j) Error detection, onboard CRC, duplicate -6 500 kbps RF rate: -84 dBm packet filtering Voltage 2.0 - 3.6 VDC Approximate Range 150 feet / 0.5 mile 800 feet / 3.2 mile (Indoor, Outdoor) (with 2dBi dipole) (with 2dBi dipole) SECURITY Temperature -40 to +85 C a) Frequency hopping air interface 26 mm x 33 mm x 4 mm (Surface Mount U.FL) 26 mm x 39 mm x 4 mm (Surface Mount Ant) b) System IDs Dimensions** 25 mm x 30 mm x 4 mm (Pluggable U.FL) c) Unique IEEE MAC Addresses 25 mm x 39 mm x 4 mm (Pluggable Ant) U.FL connector U.FL connector d) Proprietary hardware (PRM210,PRM220) (PRM230,PRM240) Antenna e) Proprietary protocol Integrated chip antenna Integrated chip antenna (PRM211/221) (PRM231/241) FCC ID: KQL-111010 FCC ID: KQL-1110200 Approvals* IC: 2268C-111010 IC: 2268C-1110200 *This is only a partial list, contact your Laird Technologies representative for a complete list of approvals. **Dimensions are for the surface mount module with U.FL connector. See user manual for specific dimensions for each model. ORDERING INFORMATION PRM210 915MHz RF Module Low Power Surface PRM230 915MHz RF Module High Power Surface DVK-PRM220 Development Kit for Low Power Mount with U.FL for external antenna Mount with U.FL for external antenna Pluggable with U.FL for external antenna PRM211 915MHz RF Module PRM231 915MHz RF Module High Power Surface DVK-PRM221 Development Kit for Low Power Low Power Surface Mount with Integrated Antenna Mount with Integrated Antenna Pluggable with Integrated Antenna PRM220 915MHz RF Module PRM240 915MHz RF Module Low Power Pluggable with U.FL for external antenna Pluggable with U.FL for external antenna DVK-PRM230 Development Kit for High Power PRM221 915MHz RF Module PRM241 915MHz RF Module Surface Mount with U.FL for external antenna Low Power Pluggable with Integrated Antenna High Power Pluggable with Integrated Antenna DVK-PRM231 Development Kit for High Power Surface Mount with Integrated Antenna DVK-PRM210 Development Kit for Low Power DVK-PRM240 Development Kit for High Power Surface Mount with U.FL for external antenna Pluggable with U.FL for external antenna DVK-PRM211 Development Kit for Low Power DVK-PRM241 Development Kit for High Power Surface Mount with Integrated Antenna Pluggable with Integrated Antenna The details contained within the document are subject to change. Download the product specification from www.lairdtech.com/wireless for the most current specification. LWS-DS-LT1110 0911 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non-infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2011 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.