TM Tgard K52 Thermally Conductive Insulators HIGH THERMAL AND DIELECTRIC PERFORMANCE INSULATOR PAD TM Tgard K52 is a high thermal and dielectric performance insulator pad consisting of a ceramic filled phase change compound coated on MT Kapton film. TM Tgard K52 phase change coating all but eliminates contact thermal resistance. The phase change coating melts at 52C and replaces all contact areas that contain air. TM Tgard K52-1 is ideal for applications requiring the best thermal performing insulator material. TM Tgard K52-2 has the best balance of thermal, dielectric and cut through performance. TM Tgard K52-3 is a 3 mil MT Kapton film that provides the best crush and cut and tear re- sistance available with thermal properties that are still in the high performance category. FEATURES AND BENEFITS APPLICATIONS High breakdown voltage of 4,000 9,000 range VAC Audio amps Resistant to tears and cut through Power modules Total thermal resistance of 0.13 - 0.30 Switching mode power supplies range C-in2/watt at 20 psi clip force Americas: +1.800.843.4556 Europe: +49.8031.2460.0 Asia: +86.755.2714.1166 CLV-customerservice lairdtech.com www.lairdtech.com/thermalTM Tgard K52 Thermally Conductive Insulators PROPERTY TEST METHOD K52-1 K52-2 K52-3 ELECTRICAL PROPERTIES Dielectric Withstand Voltage ASTM D149 3,000 volts DC 6,000 volts DC 7,500 volts DC 6.4mm probe for 30 sec. Dielectric Breakdown Voltage ASTM D149 4,200 volts AC 7,800 volts AC 9,000 volts AC 6.4mm probe 14 14 14 Volume Resistivity ASTM D257 4 x 10 4 x 10 4 x 10 Dielectric Constant 1 MHz ASTM D257 1.8 1.8 1.8 MECHANICAL PROPERTIES Composite Thickness ASTM D374 2 mil (0.051mm) 3 mil (0.076mm) 4 mil (0.102mm) MT Kapton Thickness ASTM D374 1 mil (0.025mm) 2 mil (0.051mm) 3 mil (0.076mm) Tensile Strength ASTM D412 13.5 kpsi (93 mPa) 18 kpsi (124 mPa) 20 kpsi (139 mPa) Elongation MD ASTM D412 80% 80% 80% Operating Temperature Range -60 - 150C -60 - 150C -60 - 150C Color Light amber Light amber Medium amber PRESSURE, PSI (KPA) 10 (69) 20 (138) 50 (345) 100 (689) 200 (1379) 400 (2758) TOTAL THERMAL RESISTANCE C-in/watt (C-cm/watt) K52-1 0.14 (0.90) 0.14 (0.90) 0.13 (0.84) 0.13 (0.84) 0.13 (0.84) 0.13 (0.84) K52-2 0.23 (1.48) 0.23 (1.48) 0.22 (1.42) 0.22 (1.42) 0.22 (1.42) 0.22 (1.42) K52-3 0.33 (2.13) 0.32 (2.06) 0.31 (2.00) 0.30 (1.94) 0.30 (1.94) 0.30 (1.94) STANDARD DIE CUT PARTS: Standard part sizes for TO-220, TO-247, TO-3P, TO-3PL, and TO-264 CUSTOM DIE CUT PARTS: Custom configurations available with standard tolerance of 0.5mm (0.020) Ability to handle drawings in multiple file formats. (.DXF and .DWG preferred) PRESSURE SENSITIVE ADHESIVE: Single side adhesive available on request Data for design engineer guidance only. Observed performance varies in application. Engineers are reminded to test the material in application. THR-DS-Tgard-K52 032515 Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any specific or general uses. Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Technologies Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2014 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights. A14644-00 REV F