Tputty 508 Dispensable Gap Filler PRODUCT DESCRIPTION Laird Tputty 508 is a single part dispensable material designed with automation and vertical stability in mind. Laird has leveraged its knowledge of thermally conductive fillers and resin systems to develop a single part dispensable that demonstrates reliability in a variety of application orientations. Tputty 508 is ideal for applications that can benefit from automation, and allows minimization of SKUs in applications with gap variability. In addition to providing application flexibility and variable gap adaptation, Tputty 508 will exert minimum stress on your component while maintaining interface contact to maximize thermal transfer. Combined with Lairds global technical support and global footprint, deploying Tputty 508 is easier than ever. FEATURES AND BENEFITS RoHS Compliant Complete Dispensing Solution Options Available 3.7 W/mK Demonstrated thermal cycling stability Low outgassing per ASTM E595 Available in cartridges (75cc, 180cc, 360cc, 600cc) and pails (1 gallon and 5 gallon) Packaging Size Fill Volume Fill Weight 75cc (2.5 oz) 56cc 177g 180cc (6 oz) 159cc 503g 360cc (12 oz) 326cc 1030g 600cc (20 oz) 601cc 1900g 1 gallon 4110cc 13kg 5 gallon 6320cc 20kg SPECIFICATIONS PROPERTY TYPICAL VALUE METHOD Construction Ceramic filled silicone dispensable N/A Color Green Visual Thermal Conductivity (w/mK) 3.7 Hot Disk Flow Rate (75cc taper tip, 0.125 50 g/min Laird Test Method A16724-00 orifice, 40 psi) Density (g/cc) 3.2 Helium Pycnometer Flammability V-0 UL 94 Temperature Range -40 to 150C Laird Test Method Outgassing TML (weight %) 0.04 ASTM E595 Outgassing CVCM (weight %) 0.01 ASTM E595 Dielectric Breakdown >3000 VAC ASTM D149 Dielectric Constant 1MHz 8.62 ASTM D150 Minimum Bond line Thickness 0.09 mm (0.0036) Laird Test Method -A16112-00 Americas: +1.866.928.8181 13 Volume Resistivity (ohm-cm) 10 ASTM D257 Europe: +44.(0).8031.2460.0 Asia: +86.755.2714.1166 A17223-00 Tputty 508 DS 053017 www.lairdtech.com Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2013 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Thermal Interface Products category: Click to view products by Laird Performance Materials manufacturer: Other Similar products are found below : 7721-9PPS FGN80-2 PFM-172-60 A-40 174-9-230P 9601-7 5300AC 1.500G 08133 V6622C TVQF-1225-07S TP0001 4860 SC80-W2 V6516C A17713-06 A17713-05 A17653-05 A17690-06 A17775-03 A17690-05 A17653-02 A17689-02 A17690-04 A17775-05 A17775- 06 A17690-08 A17690-02 A17689-06 A17653-06 A17690-12 A17653-03 A17536-02 A17689-03 A17536-10 A17752-13 A17752-04 A17752-07 A17634-12 19-36565-0001-1 A17752-09 22000-001A A17752-20 A17752-16 A17752-12 A17653-04 A17634-10 A17634-09 A17634-07 A17633-20 A17633-07