A17883-06 Laird Performance Materials

Tflex HD80000 Series Thermal Gap Filler PRODUCT DESCRIPTION Laird Tflex HD80000 is the latest product in the High Deflection gap filler series. Tflex HD80000 combines 6 W/mK thermal conductivity with superior pressure versus deflection characteristics. The combination will allow minimal stress on components while also yielding low thermal resistance. As a result, less mechanical and thermal stresses will be experienced within your device. The Tflex HD80000 material is extremely soft, but also can be handled and applied manually without the need to add a fiberglass or other reinforcement layer, maintaining the superior thermal performance of the product. FEATURES AND BENEFITS 6 W/mK thermal conductivity Low pressure versus deflection Excellent surface wetting for low contact resistance No fiberglass reinforcement Minimizes board and component stress Environmentally friendly solution that meets regulatory requirements including RoHS and REACH SPECIFICATIONS TYPICAL VALUE TEST METHOD PROPERTIES Construction & Composition Ceramic filled silicone sheet N/A Color Teal Visual Thickness Range 1 mm (0.040) - 5.0mm (0.20) N/A Thickness Tolerance +/- 10% N/A USA: +1.866.928.8181 Thermal Conductivity (W/mK) 6.0 Hot Disk Europe: +49.8031.24600 Density (g/cc) 3.3 Helium Pycnometer Hardness (Shore 00, 3 sec) Asia: +86.755.2714.1166 40 ASTM D2240 Hardness (Shore 00, 30 sec) 32 ASTM D2240 www.lairdtech.com Outgassing TML (weight %) 0.3 ASTM E595 Outgassing CVCM (weight %) 0.04 ASTM E595 0 0 Temperature Range -40 C to 150 C Laird Test Method Rth 50 mils, 10 psi 0.330 ASTM D5470 (Modified) Dielectric Constant 1 MHz 9 ASTM D150 UL Flammability Rating V-0 UL 94 16 Volume Resistivity 1.06 x 10 ASTM D257 A18003-00 Tflex HD80000 3-5-19 Any information furnished by Laird Limited, its subsidiary companies and its agents (hereafter, Laird) is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any specific or general uses. Laird disclaims liability for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Terms and Conditions of sale in effect at the time of sale. A current copy of the Laird Terms and Conditions will be furnished upon request. This document is Copyright 2018, Laird, all rights reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trademarks of Laird. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights. Tflex HD80000 Series Thermal Gap Filler Tflex HD80000 Thermal Resistance vs. Pressure 1.400 C-in2/W 1.200 C-in2/W 1.000 C-in2/W 0.800 C-in2/W 0.600 C-in2/W 0.400 C-in2/W 0.200 C-in2/W 0.000 C-in2/W 0 psi 5 psi 10 psi 15 psi 20 psi 25 psi 30 psi 35 psi 40 psi 45 psi 50 psi 40 mil 80 mil 120 mil 140 mil 160 mil 200 mil Tflex HD80000 Deflection vs. Pressure 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% 0 psi 10 psi 20 psi 30 psi 40 psi 50 psi 60 psi 70 psi 80 psi 90 psi 100 psi 40 mil 60 mil 80 mil 100 mil 140 mil 160 mil AVAILABILITY STANDARD THICKNESSES 1.0 mm (0.040) to 5.0 mm (0.200) thick material available in 0.25mm (0.010) increments Available in standard sheet sizes of 9 x 9 or custom die cut parts PART NUMBER SYSTEM Tflex indicates Laird elastomeric thermal gap filler product line. HD8xxxxx indicates Tflex HD80000 product line with thickness in microns EXAMPLES: Tflex HD81000 = 1000 microns / 0.040 thick Tflex HD80000 material A18003-00 Tflex HD80000 3-5-19 2 Any information furnished by Laird Limited, its subsidiary companies and its agents (hereafter, Laird) is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any specific or general uses. Laird disclaims liability for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Terms and Conditions of sale in effect at the time of sale. A current copy of the Laird Terms and Conditions will be furnished upon request. This document is Copyright 2018, Laird, all rights reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trademarks of Laird. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.