MHE06034R7M-10 Laird Performance Materials

MHE High Current Low DCR Power Inductors MHE0603 Series FEATURES AND APPLICATIONS Laird MHE series high current power inductors improve performance,reliability and power efficiency. A lower power loss benefits consumer electronics, Industrial and Telecom product design. Products feature extremely low DCR with greater efficiency and enable a larger current in a small size. Inductors are of magnetic shielding and molded construction and perform in operating temperatures ranging from -40C to 150C (including self-heating temperature rise) FEATURES High saturation current realized by optimum coil desigh and high performance powder Low profile and very compact in size Very low DCR APPLICATIONS Industrial DC to DC power lines Telecom and Datacom DC to DC power lines DC to DC converter with low power loss, low voltage and high output current such as CPU ,VRM, etc PART NUMBER EXPLANATION ELECTRICAL SPECIFICATIONS Inductance tested at 1MHz, 1.0V Heat Rated Current (Irms) is defined based on temperature rise approximate 40C without core loss (ambient temperature 255C) Saturation Current (Isat) is the DC current at which the inductance drops off approximately 30% from its value without current. (ambient temperature 255C) Operating temperature range: -40C~+150C (including self-heating temperature rise) Storage temperature range (packaging conditions): -10C~+40C and RH 60%(MAX.) Note: Heat Rated Current (Irms) is tested on a typical PCB and apply a constant current in still air. The temperature rise is dependent on the application system condition including PCB PAD pattern, trace width and thickness and adjacent components etc. Its suggested to verify the temperature rise of the component under the real operation application conditions. www.laird.comMHE0603 Series Rev:B 1.MHE0603 SERIES DIMENSIONS Recommended layout MHE0603 Series A B C D E F 7.20.3 6.50.3 3.0 Max 5.00.3 3.00.3 2.80.3 www.laird.com