Intelligent Industrial Modem M110 Series INDUSTRIAL IOT M1, & LTE CAT 1 CELLULAR MODEM IN A TINY FORM FACTOR Lantronix Mobility Solutions M110 modems are designed to provide connectivity across a broad range of M2M and IoT applications. They allow Internet connectivity via serial port to PLCs, Meters, Vending Machines. The Lantronix M110 enables transporting data from any industrial device to data control servers, allowing businesses to benefit from real-time data monitoring, management and control. Perfect For: Compact Design Lantronix M110 series modems are a smart modem supporting serial RS-232 and USB communication on a small form factor for fast and seamless integration with industrial equipment such as electricity meters, programmable logic controllers, lifts and vending machines. Oil & Gas Monitoring Smart Metering Multiple Cellular Network Support in 4G LTE-M1 & Cat 1 M110 is available on LTE standards such as LTE Cat 1 and M1 for IoT applications, allowing devices that operate on carrier networks to be less expensive and more power-efficient. Low Power Consumption for Remote IoT Application Industrial Automation POS & Kiosk Deploying IoT devices in remote access requires low power consumption in an environment when electricity is not always on and the device needs to run for a month on battery or solar M110 Series Highlights panel. M110 can achieve as low as 21 mA in idle mode, giving a month of autonomy when the device simply wakes up when communication is triggered. Available in LTE-M1, LTE Cat 1 Two versatile I/Os Intelligent Modem Running mPack Software Compact Design (60 x 66 x 21.7 mm) M110 modems have been specially designed to be easily deployed in your retrofit solution. Its auto TCP dial-up function allows initiating any communication of a serial device with or without mPack Software Suite dial-up capability. Device options like dial-up, TCP/UDP permanent client/server or on-demand Low power consumption in idle mode client with two TCP are all available. Compatible with Lantronix Connectivity Services Optional RS485 with SNAP CAP Snappily converts M110 series RS-232 port on a 9-pin sub-D connector into an isolated *, half or full-duplex (user-selectable via a slide switch) RS-485 port on a 5-pin, 3.5 mm pitch, COMBICON connector. * i.e with integrated transformer, thus allowing for 1.5 km-long cabling. Intelligent Industrial M110 Series Modem Hardware Software Suite Cellular MPack Software Suite One- or two-antenna models LTE Cat 1 M114 via two SMA antenna Connectivity: Dial-up, TCP / UDP permanent client / server or on-demand client with two 2G M111 3G M115 dual mode connectors (main and diversity) TCP / UDP sockets for failover, Network connectivity watchdog LTE-M1 / NB-IoT M113 via an SMA Miscellaneous Features: Support for concatenated SMS, TCP, Configurable text and antenna connector recipient(s) upon Last Gasp DOTA: via users HTTP server I/Os Two 2-way versatile I/Os, i.e. user-configurable, DIGITAL OUTPUT: open collector 200 mA Last Gasp each one independently from the other, as max. 50 V dc max. Factory Options: Allows for sending at least five 30-character SMS at one-second intervals either (i) analogue input or (ii) digital output via Factory Option - 3-Way I/Os: Third possible courtesy of two industrial-grade super caps* the lower row of the same header configuration as (iii) analogue input suited Connectivity Services ANALOGUE INPUT: 0 V dc ~ 48 V dc to current loop sensors (aka 4 mA ~ 20 Compatible with Lantronix Connectivity Services