Product Information Page 1 of 4 LFLEX 150 QUATTRO Valid: 04.04.2011 Product Description Broad application range due to multiple approvals Application range Plant engineering and construction Industrial machinery Air conditioning installations machine tools Mainly in dry, damp and wet interiors (including water-oil mixtures), but not for outdoor use For fixed installation under medium mechanical load conditions as well as occasional flexing at free, non-continuously recurring movement without tensile load or compulsory guidance Note: Single conductor or multi-conductor Type AWM (Appliance Wiring Material) shall be permitted for industrial machinery (US) when part of a listed assembly suitable for the intended use only. NFPA 79 Edition 2007 12.2.7.3 (Electrical Standard for Industrial Machinery) Benefits Broad application range due to multiple approvals Design Fine strands of bare copper wires PVC core insulation PVC outer sheath, increased oil resistance grey (RAL 7001) Approvals (Norm references) Multi standard cables have conductor strands with nominal sizes in mm or AWG/kcmil nominal sizes. The master size is mentioned in the table below, the equivalent size of the other system can be found in the catalogue appendix table T16. For this related secondary size the conductor cross-section mostly works out greater than the specified nominal value. Product features Flame retardant according to IEC 60332-1-2 and UL 1581 1061 Cable Flame TestProduct Information Page 2 of 4 LFLEX 150 QUATTRO Valid: 04.04.2011 Increased oil resistance Technical Data Core identification code Rated voltage Black with white numbers acc. to VDE 0293 HAR U0/U: 300/500 V Approvals UL/CSA: 600 V H05VV5-F (HD 21.13 S1) Test voltage UL AWM Style 21098 or 2587 CSA AWM I A/B II 3000 V A/B Protective conductor Specific insulation resistance G = with protective conductor GN/YE > 20 GOhm x cm X = without protective conductor Conductor stranding Range of temperature Fine wire in accordance to VDE 0295 Class 5 / IEC Occasional flexing: HAR: -5C up to +70C UL/CSA: -5C 60228 Class 5 up to +90 C Minimum bending radius Fixed installation: HAR: -40C up to +70C UL/CSA: -40C Occasional flexing: 12.5 x cable diameter up to +90C Fixed installation: 4 x cable diameter Article List Number Part Outer Copper Weight of cores and mm per number diameter in mm index kg/km kg/km conductor LFLEX 150 QUATTRO 0015002 2 X 0,5 5,9 9.6 47 0015003 3 G 0,5 6,2 14.4 62.4 0015004 4 G 0,5 6,8 19.2 68.2 0015005 5 G 0,5 7,4 24.0 87.1 0015007 7 G 0,5 9.0 33.6 118.7 0015012 12 G 0,5 11,1 58.0 198 0015018 18 G 0,5 14,2 86.4 328 0015025 25 G 0,5 16.0 120.0 380.4 0015034 34 G 0,5 18,1 164.0 509 0015041 41 G 0,5 19,7 197.0 595 0015102 2 X 0,75 6,3 14.4 61 0015103 3 G 0,75 6,7 21.6 75.6 0015104 4 G 0,75 7,2 28.8 83.9