0027972 Lapp Kabel

U.I. Lapp PRODUCT INFORMATION GmbH LFLEX SERVO FD 796 CP 12.09.2012 Allows much faster speed and accelerations which increases the economic efficiency of the machines Multi-standard = fewer part varieties = cost savings Suitable for use with servomotor drive systems from leading manufacturers The advantage: the modified design of the control core pairs means the longitudinal voltage drop is lower it also permits considerably higher operating voltages in the auxiliary circuits To substitute 7 LFLEX SERVO FD product lines: 755CP/-755CP DESINA/-781CP/-785CP/-785CP DESINA/-790CP/-795CP Info New high-end version For very dynamic motion sequences Slim = less space required Multiple certifications Application range Connecting cable between servo controller and motor In power chains or moving machine parts For use in assembling & pick-and-place machinery Particularly in wet areas of machine tools and transfer lines Assembly lines, production lines, in all kinds of machines Design Extra-fine wire strand made of bare copper wires (class 6) Core insulation: polypropylene (PP) Individual design depending on the item: power cores with or without one pair, or with two control core pairs, in pairs, with screening, twisted together in short lay lengths Non-woven wrapping Tinned-copper braiding PUR outer sheath, orange (RAL 2003) Approvals (Norm references) For use in power chains: Please comply with the assembly guidelines listed in Appendix T3 Product features Dynamic performance in power chains: Acceleration up to 50 m/s. Travel speeds up to 5 m/s. Travel distances up to 100 m. Low-capacitance design: this may result in lower EMI interference, depending on the drives electrical operating conditions. Halogen-free materials Flame retardancy: UL/CSA: VW-1, FT1 IEC/EN: 60332-1-2 Oil-resistant Remark Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon request. Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths Photographs are not to scale and do not represent detailed images of the respective products. Product Management Document: LAPP PRO205378EN.pdf 1 / 3 PN 0486/0 03. 0 2012 Lapp Group - Technical changes reserved Photographs are not to scale and do not represent detailed images of the respective products.U.I. Lapp PRODUCT INFORMATION GmbH LFLEX SERVO FD 796 CP 12.09.2012 Technical Data Core identification code: Power: black cores with marking U/L1/C/L+ V/L2 W/L3/D /L- and 1 green-yellow core Optional designs with one pair of control cores: black white Two pairs of control cores: black with white numbers: 5, 6, 7, 8 Approvals: VDE - Reg. - No. 8591 UL AWM Style 20234 CSA AWM I/II, A/B 1000 V 80 FT 1 Specific insulation resistance: > 20 GOhm x cm Conductor stranding: Extra-fine wire according to VDE 0295, class 6/IEC 60228 class 6 Minimum bending radius: For flexible use: 7.5 x outer diameter (1.5-16 mm) 10 x outer diameter (25-50 mm) Fixed installation: 4 x outer diameter Nominal voltage: VDE: power cores and control cores: U /U: 600/1000 V 0 UL & CSA: 1000 V Test voltage: Core/Core: 4 kV Core/Screen: 4 kV Protective conductor: G = with GN-YE protective conductor Temperature range: Flexing: -40C to +80C Fixed installation: -50C to +80C Product Management Document: LAPP PRO205378EN.pdf 2 / 3 PN 0486/0 03. 0 2012 Lapp Group - Technical changes reserved Photographs are not to scale and do not represent detailed images of the respective products.