PRODUCT INFORMATION UNITRONIC Li2YCY PiMF Screened data transmission cable with PE core insulation and pairs in metalfoil UNITRONIC Li2YCY PiMF: Low-frequency low-capacitance screened PVC data cable with DIN 47100 coded PE core Pairs in Metal Foil, RS422/ RS485 interface wiring Info Metal foil screened pairs Interference signals Benefits Data transmission cable with low capacitance, pair screening and overall copper braiding Particularly suitable for wiring data systems and controls in large industrial plants Individually screened pairs and the overall braid minimise electrical interference Decoupling of circuits by means of twisted-pair (TP) design (crosstalk effects) Application range For enhanced requirements in near-end cross-talk attenuation and high electrical interference in the circuits Suitable for the transmission with varying in frequency and voltage or sensitive signals Can be used multifunctional in electronics of computer systems, electronic control equipment, office machines, balances, etc. For measurement value transmission and serial 2-wire interfaces Intended for limited flexible use, and for fixed installation in dry or damp interiors Product features Flame-retardant according IEC 60332-1-2 Product Make-up 7-wire or fine-wire (from 1 mm) strands made of bare copper wires Core insulation made of polyethylene (PE) Cores twisted into pairs Last Update (17.12.2018) 1 / 3 2018 Lapp Group - Technical changes reserved Product Management www.lappkabel.de You can find the current technical data in the corresponding data sheet. PN 0456 / 02 03.16 PRODUCT INFORMATION UNITRONIC Li2YCY PiMF Foil wrapping, static screening made of aluminium-laminated plastic film with copper drain wire for each pair Bare copper screen braiding Outer sheath made of PVC Outer sheath colour: pebble grey (RAL 7032) Technical Data Classification ETIM 5: ETIM 5.0 Class-ID: EC000104 ETIM 5.0 Class-Description: Control cable Classification ETIM 6: ETIM 6.0 Class-ID: EC000104 ETIM 6.0 Class-Description: Control cable Core identification code: 0.22 mm-0.5 mm: according to DIN 47100, see table T9 1.0 mm: a-core: white, b-core: black Mutual capacitance: At 800 Hz: 0.22 mm: max. 70 nF/km 0.34 mm: max. 70 nF/km 0.5 mm: max. 75 nF/km 1.0 mm: max. 85 nF/km Inductivity: Approx. 0.4 mH/km Conductor stranding: Stranded conductor, based on VDE 0881, 7-wire Minimum bending radius: Occasional flexing: 20 x outer diameter Fixed installation: 10 x outer diameter Test voltage: Core/core: 2000 V Core/screen: 1000 V Characteristic impedance: approx. 85 Ohm (> 1 MHz) Temperature range: Occasional flexing: -5C to +70C Fixed installation: -40C to +80C Note Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon request. Copper price basis: EUR 150/100 kg. Refer to catalogue appendix T17 for the definition and calculation of copper-related surcharges. Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths Packaging size: coil 30 kg or 250 m, otherwise drum Please specify the preferred type of packaging (e.g. 1 x 500 m drum or 5 x 100 m coils). TERMI-POINT is a registered trademark of AMP Photographs and graphics are not to scale and do not represent detailed images of the respective products. Prices are net prices without VAT and surcharges. Sale to business customers only. Last Update (17.12.2018) 2 / 3 2018 Lapp Group - Technical changes reserved Product Management www.lappkabel.de You can find the current technical data in the corresponding data sheet. PN 0456 / 02 03.16