1232114 Lapp Kabel

U.I. Lapp PRODUCT INFORMATION GmbH LFLEX HEAT 125 SC 29.11.2013 VDE tested single cores according to EN 50525-3-41 (H05Z-K & H07Z-K) for more demanding requirements For safety in areas with high density of people Reduction of flame propagation, density and toxicity of smoke gases in event of fire Minimises damage to buildings and equipment caused by the formation of toxic acid fumes in fires Certified for maritime applications Halogen-free Temperature-resistant Info Substitudes previous LFLEX HEAT 145 SC, H05Z-K 110C & H07Z-K 110C VDE-tested and -marked Improved characteristics in the event of a fire Application range For the wiring and connection of lighting, heating appliances, control cabinets, and distributors in mechanical and plant engineering For installation in tubes, on, in and under plaster as well as in closed installation ducts Design Fine-wire, tinned-copper conductor Electron beam cross-linked polyolefin copolymer insulation Norm references / Approvals According to EN 50525-3-41 with advanced features GL (Germanischer Lloyd) Product features Fire behaviour:- Halogen-free (IEC 60754-1)- No corrosive gases (IEC 60754-2)- Low smoke density (IEC 61034-2)- Flame- retardant (IEC 60332-1-2)- Low toxicity (EN 50305) Extended fire behaviour:H05Z-K (0,5mm up to 1,0mm):see data sheetH07Z-K ( 1,5mm): no fire propagation according to IEC 60332-3-24 respectively IEC 60332-3-25 Abrasion and notch-resistant Remark Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon request. Copper price basis: EUR 150/100kg. Refer to catalogue appendix T17 for the definition and calculation of copper-related surcharges. Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths Packaging size: coil 30 kg or 250 m, otherwise drum Please specify the preferred type of packaging (e.g. 1 x 500 m drum or 5 x 100 m coils). Photographs are not to scale and do not represent detailed images of the respective products. Cross-section 0.25 mm only available as 300 m boxCross-section 0.5 mm only available as 200 m boxCross-section 1.0 - 4 mm only available as 100 m box Article number index of core colours: 000 = green-yellow / 001 = black/ 002 = blue/ 114 = dark blue / 003 = brown / 005 = yellow / 006 = green / 007 = violet / 009 = orange / 104 = red / 105 = white / 106 = grey Product Management Document: LAPP PRO216111EN.pdf 1 / 5 PN 0486/0 03. 0 2012 Lapp Group - Technical changes reserved Photographs are not to scale and do not represent detailed images of the respective products.U.I. Lapp PRODUCT INFORMATION GmbH LFLEX HEAT 125 SC 29.11.2013 Technical Data Core identification code: refer to article table Classification: ETIM 5.0 Class-ID: EC000993 ETIM 5.0 Class-Description: Single core cable Conductor stranding: Fine wire acc. to VDE 0295, class 5 / IEC 60228 class 5 from 0.5 mm Minimum bending radius: Fixed installation: 4 x outer diameter Nominal voltage: Up to 1.0mm U/U 300/500 V From 1.5mm U/U 450/750 V 0.6/1kV from 1.5 mm in the case of fixed and protected installation Test voltage: 3500 V Temperature range: Fixed installation: -55 C to +125 C Short-term: up to +145 C Product Management Document: LAPP PRO216111EN.pdf 2 / 5 PN 0486/0 03. 0 2012 Lapp Group - Technical changes reserved Photographs are not to scale and do not represent detailed images of the respective products.