U.I. Lapp DATA SHEET GmbH DB 1312802 LFLEX CLASSIC 400 P valid from: 2013-02-01 Application LFLEX CLASSIC 400 P cables are oil resistant control cables with a Polyurethan outer sheath, for flexible use and fixed installation for medium mechanical abuse. They are for use in dry, damp and wet rooms. With consideration to the specified temperature range its possible to use it outside. LFLEX CLASSIC 400 P cables are increased oil resistant and at room temperature generally resistant against acids and caustics solution. The outer sheath is resistant against high mechanical abuse, particularly to abrasion and cutting. It is microbe-proof and hydrolysis resistant. Continuous, busy movements, usage of these cables in moving cable carriers, respectively on motor drum guidance or under a strain of more than 15 N/mm is not allowed. Cable with black outer sheath are DESINA certified. Application range: LFLEX CLASSIC 400 P cables are for use as control - and power cable for machine tools and mechanical engineering. Design Design based on EN 50525-2-51 resp. VDE 0285-525-2-51 / HD 21.13 S1+A1 resp. VDE 0281-13 EN 50525-2-21 resp. VDE 0285-525-2-21 / HD 22.10 S2 resp. VDE 0282-10 Conductor bare copper, fine wire strand in acc. to IEC 60228 resp. VDE 0295, class 5 Core insulation LAPP special PVC compound P8/1, better than the PVC compound TI2, Acc. to EN 50363-3 resp. VDE 0207-363-3 Core identification acc. to VDE 0293-1, with or without GN/YE ground conductor black cores with white numbers acc. to DIN EN 50334 resp. VDE 0293 part 334 Outer sheath Polyurethane compound TMPU acc. to EN 50363-10-2 resp. VDE 0207-363-10-2 Farbe: silver grey, similar RAL 7001 DESINA compliant, black, similar RAL 9005 Electrical properties Nominal voltage U /U: 300 / 500 V 0 Test voltage Core / Core: 4000 V AC Mechanical and thermal properties Min. bending radius occasional flexing: 12,5 x outer diameter fixed installation: 4 x outer diameter Temperature range occasional flexing: -5 bis +70 C max. conductor temp. fixed installation: -40 bis +80 C max. conductor temp. Oil resistance acc. to EN 50363-10-2 resp. VDE 0207-363-10-2 UV resistance acc. to EN ISO 4892-2-2006, method A (change of colour allowed) Ozone resistance acc. to EN 50396 resp. VDE 0473-396, method B Tests acc. to IEC 60811, EN 50395, EN 50396 EC Directives This cable is conform to the EC-Directives 2006/95/EC (Low Voltage Directive) and 2011/65/EU (RoHS, Restriction of the use of certain hazardous substances). Originator: KASC / PDC Document: DB1312802EN Page 1 of 1 approved: HAPF / PDC All rights reserved acc. to DIN ISO 16016. PD 0019/2.2 11.10EN X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for lapp kabel manufacturer: Other Similar products are found below : 00008779 0026122 0026156 0026124 0026127 0026253 70002624 70002708 70002728 EPIC KIT H-A 10 BS TBF-LB M20 EPIC KIT H- A 3 BS AGS EPIC KIT H-BE 16 BS AG EPIC KIT LS1 A1 3+PE+4 K 22260044 22260046 22260134 22260986 22262020 22262022 22262023 22262027 21700623 22260045 22260122 22260638 22260651 4510011 4510012 4510052 4510073 4520002 4520003 4520013 4520021 52005990 52006010 52006030 52006107 52006133 52006153 52006173 52103115 52103165 52115750 53015600 53015620 53015650 53016610 53016830 53316240