Suggested Copy for Lapp Limited in Farnell Catalogue Etherline FD P CAT. 5 4x2x26AWG (Farnell: Etherline FD P CAT. 5 4x2x26AWG) Application ETHERLINE FD P CAT. 5 4 x 2 x AWG 26/19 is a CATEGORY 5 high speed data transmission cable suitable for application in the industrial environments. This data cable meets the requirements of Standards EIA/TIA-568 TSB-36 and ISO/IEC 11801Generic Cabling for Customer Premise for CLASS D Links. The cable is intended for highly flexible application in power chains or permanently moving machines and linear robots in dry and damp interiors and in harsh industrial environment. The PUR sheath is very resistant against mineral oils and abrasion.. Design Conductor bare copper wire, 0.14 mm2 (19x 0.10), (26AWG) Insulation foam-skin, core diameter max. 1.0 mm Stranding 2 cores twisted to pairs, stranding from 4 pairs Colour coding pair 1: white/blue and blue pair 2: white/orange and orange pair 3: white/green and green pair 4: white/brown and brown Inner sheath halogen free compound of TPE Screening braid of tinned copper wires, coverage 85 % Sheath PUR, halogen free, flame retardant, water blue similar to RAL 5021 Outer diameter 6.3 mm Electrical properties at 20 C DC resistance (loop) max /km 284 Insulation resistance min. G xkm 5 Mutual capacitance at 800 Hz nom. nF/km 48 Impedance at 1 -100 MHz 100 15 Velocity of propagation nom. % 71 Propagation delay at max. nsec/m 5.2 Delay skew at 100 MHz max. ns/100m 40 Transfer impedance at 20 MHz max. M /m 10 Operating voltage (not for power purposes) peak value V 125 Test voltage core/core Urms V 1000 core/screen Urms V 500 Mechanical and thermal characteristics Minimum bending radius flexible mm 95 Permissible temperature range flexible C -5 to 50 static C -40 to 70 Flame propagation flame retardant acc. to IEC 60332-1 General properties All materials used for the cable and during manufacturing are free of LBS. (e.g. silicone). LBS = substances destructive to lacquer-coatings.